00198628-01_Option_Stationäre-Kamera_TX12_V2_de_en.pdf - 第74页

2 Brief description 2.2 Product Description 74 Assembly Instructions / Montageanleitung SIPLACE TX-Series V2 Stationary Camera Type 25/33 Stationäre Kamera Typ 25/33 10/2018 2.2 Product Description SIPLACE TX1 and TX2 ma…

100%1 / 114
2 Brief description
2.1 Basic machine – overview
Assembly Instructions / Montageanleitung SIPLACE TX-Series V2 Stationary Camera Type 25/33 Stationäre Kamera
Typ 25/33 10/2018
73
2 Brief description
2.1 Basic machine – overview
Fig.8: Overview of SIPLACE TX1/TX2 V2
1 Stationary camera
Replacing the Stationary Component Camera Digital Type 25/33/GigE
2 Reject box with nozzle station
Replacing the reject bin with nozzle station
3.2 "Converting the Reject Box" [}82]
2 Brief description
2.2 Product Description
74 Assembly Instructions / Montageanleitung SIPLACE TX-Series V2 Stationary Camera Type 25/33 Stationäre Kamera
Typ 25/33 10/2018
2.2 Product Description
SIPLACE TX1 and TX2 machines of version 2 can accommodate an FC camera of type25 or an
IC camera of type33 in location 1.
Fig.9: FC camera of type 25
1. FC camera of type 25 in the machine
(only possible with TH)
Fig.10: IC camera of type 33
1. IC camera of type 33 in the machine (only pos-
sible with TH and CPP head configuration)
NOTICE
The camera upper section has a fixed assignment to the camera lower section.
The camera upper section may not be used with another camera lower section. Both the
upper and lower sections are mechanically and electrically coordinated and may not be
exchanged for use with other cameras. The serial and version numbers of the top and
bottom sections of the camera must be identical.
2 Brief description
2.3 Machines of the SIPLACE TX V2-Series
Assembly Instructions / Montageanleitung SIPLACE TX-Series V2 Stationary Camera Type 25/33 Stationäre Kamera
Typ 25/33 10/2018
75
2.3 Machines of the SIPLACE TX V2-Series
Fig.11: Overview of TX V2-Series machines
1. Location 1
2. Location 2
3. Power supply
4. Pneumatics
5. BoxPC (behind the waste tape chute)
T = transport direction
2.3.1 Serial number of the machine
Fig.12: Serial number
The serial number is printed on the typeplate(1) that
can be found on the inside of the machine frame in
location1.
2.4 Prerequisites
A stationary camera can be installed in all SIPLACETX1V2 and SIPLACETX2V2 machines.
SIPLACETX2i machines cannot be equipped with a stationary camera.
2.5 Restrictions
A stationary camera can be installed in location 1 only.
Only a stationary camera of type 25 (only possible with TH) or type 33 (possible with TH and CPP)
can be installed.