AOI_RS_v85_en.pdf - 第60页
Chapter 2 Repair Station Main Progr am AOI Repair Station 56 The Options CbBoa rdsn － Barcode or the inspection ti me. Cbstatus － S tatus which is displayed by graph. CbS tatusName － S tatus which is displayed by…
Chapter 2 Repair Station Main Program
AOI Repair Station
55
Max Dbsize
Input the maximum of the database. When the size of database is
up to the maximum value, the system shows the warning. If you
have set [Version Kind] as [AutoBkDb], the system would
backup the database automatically when the size is to the limit.
The default setting of [Max Dbsize on the stand-alone version on
the following figure is 2000MB. Do not set size over 2000MB.
You may set the size based on the size of server’s hard disk under
the Server version
10.6.3 Board Field Show
You can set which columns you want to show on [BoardSN] field at
confirm working.
Chapter 2 Repair Station Main Program
AOI Repair Station
56
The Options
CbBoardsn－Barcode or the inspection time.
Cbstatus－Status which is displayed by graph.
CbStatusName－Status which is displayed by words.
CbFdate－Inspection time.
CbTopBtm－Top or bottom
CbTrans－Condition of connecting Shop Flow
CbTestcount－Number of times been tested under the same
barcode.
Cbimulti－Number of multi boards per set
CbModifier－modifier
CbModifierDate－Date modified
10.6.4 Auto Link
Procedure
Step1. Check the [Enable] to initiate [Auto Link] function, uncheck
the [Enable] to disable [Auto Link] function.
Step2. Select auto ink category at [Directory Path] field.
Step3. Press [SETTING] to complete setup.
Chapter 2 Repair Station Main Program
AOI Repair Station
57
Function
When ICT sends untested component data to the REPAIR
STATION, the REPAIR STATION will show alarm and display
its component data in AREA1
The user may clear the data by executing ACTION1, and then
[ICT Auto Warning(area2)] will be presented, at this point you
may execute [Delete(Action2)] to clear up the data files. Press
[OK(Action3)] to finish when cleaning process is confirmed
10.6.5 Error code Toolbar
When selecting [Fix], you can set the width of [Defect Type] of
[Defect Area] manually. When selecting [AutoAdjust], the system
adjusts the width of [Defect Type] button automatically.