AOI_RS_v85_en.pdf - 第86页
Chapter 2 Repair Station Main Progr am AOI Repair Station 82 12.2 T roubleshooti ng Procedure 12.3 Network Problem AOI Main PC and Repair PC have to install [NetBEUI Protocol] in Local Area Connection. If one of the co…
Chapter 2 Repair Station Main Program
AOI Repair Station
81
will cause error while installing the repair station or update again, this
will generate another [COM+] in addition to the previous [COM+].
The following dialog means there is a program (here is InsertData.exe)
not closed. User only has to close the program and press [Retry] to
continue installing.
Chapter 2 Repair Station Main Program
AOI Repair Station
82
12.2 Troubleshooting Procedure
12.3 Network Problem
AOI Main PC and Repair PC have to install [NetBEUI Protocol] in
Local Area Connection. If one of the computers has installed
[NWLink IPX/SPX/NetBIOS Compatible Transport Protocol], the
other computer has to be installed it.
Be sure that the drive share of C$ and D$ have been set well in Repair
PC.
Ethernet connection problem. Select [Start/ Run] and input [\\RepairPC
Name\C$ (D$)] to be sure that you can read or write data through this
path.
If the main PC and RS PC still can’t see each other, user could use IP
Network Problem. See 錯
錯錯
錯
!
.
Yes
No
AOI program setting
1. Check [Link to Repair]?
2. Path in [Panel/
RepairStation] is set to
[C:\AOI_Reapir_Data]
folder on RS PC?
Update the
RS version
to the last
version.
Database
or Hard
Disc is full.
See
錯誤
錯誤錯誤
錯誤!
Insertdata.exe
isn’t open or
can’t be open.
See
錯誤
錯誤錯誤
錯誤! 找
找找
找
If there are [*.fail],
[*.afail] or [*.efail] file in
[C:\AOI_Repair_Data] folder
on Repair Station.
If there are
[*.dir] or [*.err] file in
[C:\AOI_Repair_Data]
folder on Repair Station.
No
No
Yes
Yes
Close Insertdata.exe
then inspect a board again,
see if there are data sent to
[C:\AOI_Repair_Data] on
Repair Station.
Insertdata.exe isn’t open or
can’t be open. See
錯誤
錯誤錯誤
錯誤!
Chapter 2 Repair Station Main Program
AOI Repair Station
83
to link the computers.