00197500-01_IM_Material Manager_1.0_DE_EN.pdf - 第23页

Installing the MaterialManager Installation Manual Material Manager V1.0 23 SIPLACE Pro Deployment Scenario Deployment Scenario ▪ Central This setting means that a single SIPLACE Pro syst em is used for all production l…

Installing the MaterialManager

22 Installation Manual Material Manager V1.0

Configuring Material Manager – Miscellaneous tab

In this tab you set various parameters, such as default report printer, synchronization with SIPLACE

Setup Center, handling of unknown material definitions, SIPLACE Pro deployment scenarios and print

ing material requirement lists.

Report Configuration

Default printerpath

Path and network name of the pre-set report printer.

Material Reorder

Send Reply to Setup Center

If this option is enabled, the responses of the external storage system to material requirements will be

transmitted to Setup Center.

Create Material Definition on Packaging Unit import

Create Material Definition on Import

If this option is enabled, a material definition is generated for a packaging unit if it is registered in the

Material Manager via the Web service interface or via a PackagingUnitCreated message from SIPLACE

Setup Center and the provided part number is unknown to the Material Manager.

NOTICE

Required software

This function requires software that has to be created by the customer.

Installing the MaterialManager

Installation Manual Material Manager V1.0 23

SIPLACE Pro Deployment Scenario

Deployment Scenario

▪ Central

This setting means that a single SIPLACE Pro system is used for all production lines.

▪ ProductionLine

This setting means that a separate SIPLACE Pro system is used for each production line.

▪ EDM

This setting is a mixture of the Central and ProductionLine options, i.e. an overall SIPLACE Pro sys

tem is used as master for multiple production lines for which, on the other hand, separate SIPLACE

Pro system are used as clients in addition.

▪ EDMn

This setting complies with the EDM option and applies if several scenarios of that type are used.

Material Requirement List – PDA

The operator can require a material reorder over PDA. If another colleague as the operator has to pro

vide the material from the storage, this colleague should be informed accordingly.

Print Material Requirement List

If this option is enabled, the corresponding material requirement list will be printed when a material re

order is required (ideally, on a printer close by the storage location).

Otherwise, the material requirement list will not be printed, e.g. because the operator picks up the re

quired material himself.

Configuring Material Manager – Packaging Unit Management

For various reasons, packaging units may be flagged as Locked.

In this tab you can unlock locked packaging units for certain processes.

Installing the MaterialManager

24 Installation Manual Material Manager V1.0

Should locked Packaging Units be included for process?

Process Create Storage List

If this option is enabled, locked packaging units may be used when storage lists are created.

Process Create Pick List

If this option is enabled, locked packaging units may be used when pick lists are created.

Process Receipt Packaging Unit

If this option is enabled, locked packaging units may be used within the material receipt process.

Process Create Restorage List

If this option is enabled, locked packaging units may be used when storage lists returned from the

production are created.

Automatic printing of expired material report

If necessary, it is possible to print a list of all expired packaging units automatically. Expired means that

the expiration date of the packaging unit has been exceeded. The entries remain in the list until the

packaging unit has been manually deleted or the expiration date of the packaging unit has been changed

accordingly.

Enable automatic printing

If this option is enabled, the list will be created and printed.

In the options that are displayed now, set time and the printer to be used.

Select at least one day of the week for automatic printing

Enable at least one day of the week on which the list shall be created and printed.

Report time

Set the time at which the list shall be printed.

Use standard printer

Enable this option if the pre-set default printer shall be used to print the list.

Printerpath

If another printer as the default printer shall be used, enter the path and network name of it here.