00197500-01_IM_Material Manager_1.0_DE_EN.pdf - 第33页
Setting Up a PC for the PDA and the 2D Scanner Configuring the PDA Installation Manual Material Manager V1.0 33 Entering IP address The IP address of the server on which the SIPLACE Material Mana ger is installed has to …
Setting Up a PC for the PDA and the 2D Scanner
Configuring the PDA
32 Installation Manual Material Manager V1.0
4.2
4.2 Configuring the PDA
Configuring the PDA
After the PDA client has been installed on the PC, the PDA has to be configured.
Start screen on the PDA
The start screen of the Material Manager is displayed.
► Click on the Menu button.
Displaying menu entries
The menu entries are displayed.
► Select the IPConfig menu entry.
Setting Up a PC for the PDA and the 2D Scanner
Configuring the PDA
Installation Manual Material Manager V1.0 33
Entering IP address
The IP address of the server on which the SIPLACE Material Manager is installed has to be entered in
this dialog box.
► Enter the IP address in the IP-Address input box.
The Port Number is pre-set. If this has to be changed, ask your system administrator for the value to be
entered.
► Click on the OK button.
Setting Up a PC for the PDA and the 2D Scanner
Installing an Upgrade of the PDA Client Software
34 Installation Manual Material Manager V1.0
4.3
4.3 Installing an Upgrade of the PDA Client Software
Installing an Upgrade of the PDA Client Software
If a new version of the PDA client software gets installed on the PC, the installation program detects
whether a previous version has already been installed.
In this case, the following message is displayed.
Previous version present
► Click on Yes to remove the previous and install the new version.
The following message is displayed on the PDA:
Previous version present
► Click on OK to remove the previous and install the new version.