00197500-01_IM_Material Manager_1.0_DE_EN.pdf - 第46页

Distributed Installation Example: Settings under W indows Server 2008 R2 46 Installation Manual Material Manager V1.0 Security properties under Wind ows Server 2008 R2 ► Set the single values a s displayed above. ► Click…

Distributed Installation

Example: Settings under Windows Server 2008 R2

Installation Manual Material Manager V1.0 45

7 Distributed Installation

Distributed Installation

If the Material Manager database shall be installed on another server as the application, the MS DTC

properties have to be set on this server at first. The procedure depends on the operating system.

► Install the data required for the respective operating system on the server from the Support Media

DVD.

The following section exemplifies how to set the MS DTC properties under Windows Server 2008 R2.

7.1

7.1 Example: Settings under Windows Server 2008 R2

Example: Settings under Windows Server 2008 R2

Proceed as follows to open the dialog box containing the MS DTC properties:

► Open the command line above Start / Run:

► Enter dcomcnfg and click on OK.

The dialog box containing the component services is displayed.

Component services under Windows Server 2008 R2

► Click here on Component Services / Computers / My Computer /

Distributed Transaction Coordinator / Local DTC and then in the Actions area under LocalDTC on

More Actions / Properties.

The dialog box containing the local DTC properties is displayed.

► Click on the Security tab.

Distributed Installation

Example: Settings under Windows Server 2008 R2

46 Installation Manual Material Manager V1.0

Security properties under Windows Server 2008 R2

► Set the single values as displayed above.

► Click on OK.

Uninstalling the MaterialManager

Installation Manual Material Manager V1.0 47

8 Uninstalling the MaterialManager

Uninstalling the Material Manager

► Insert the installation CD into the CD drive of the server on which the Material Manager is installed

to uninstall the Material Manager.

► Switch over to the Install folder on the CD.

► Double-click on the ASM.AS.SiMM.MainInstaller.exe file.

Start screen

The start screen of the installation program is displayed.

► Click on Next to continue the uninstalling procedure.

Selecting uninstalling procedure

► Click on Remove All.