00197500-01_IM_Material Manager_1.0_DE_EN.pdf - 第44页
Changing the Configuration 44 Installation Manual Material Manager V1.0
Changing the Configuration
Installation Manual Material Manager V1.0 43
6
6 Changing the Configuration
Changing the Configuration
The configuration that has been set during the installation of the Material Manager can be changed
afterwards in dialog boxes.
► Switch to the <
installation folder
>/ConfigurationHelper folder on the server on which the Material
Manager is installed.
► Double-click on the ConfigurationHelper.exe file.
The GUI of the ConfigurationHelper is displayed.
The data that can be changed in this dialog box is identical to the data you have set during the installation
of the Material Manager.
NOTICE
Further Information
A detailed description of these dialog boxes can be found in the Material Manager Operating
Manual.
Changing the Configuration
44 Installation Manual Material Manager V1.0
Distributed Installation
Example: Settings under Windows Server 2008 R2
Installation Manual Material Manager V1.0 45
7
7 Distributed Installation
Distributed Installation
If the Material Manager database shall be installed on another server as the application, the MS DTC
properties have to be set on this server at first. The procedure depends on the operating system.
► Install the data required for the respective operating system on the server from the Support Media
DVD.
The following section exemplifies how to set the MS DTC properties under Windows Server 2008 R2.
7.1
7.1 Example: Settings under Windows Server 2008 R2
Example: Settings under Windows Server 2008 R2
Proceed as follows to open the dialog box containing the MS DTC properties:
► Open the command line above Start / Run:
► Enter dcomcnfg and click on OK.
The dialog box containing the component services is displayed.
Component services under Windows Server 2008 R2
► Click here on Component Services / Computers / My Computer /
Distributed Transaction Coordinator / Local DTC and then in the Actions area under LocalDTC on
More Actions / Properties.
The dialog box containing the local DTC properties is displayed.
► Click on the Security tab.