Nordson_EFD_GV_Series_Operating_Manual.pdf - 第133页
GV Series Automated Dispensing Systems 133 www.nordsonefd.com info@nordsonefd.com +1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide. Using the Sort Path By Option (continued) App…
GV Series Automated Dispensing Systems
132 www.nordsonefd.com info@nordsonefd.com +1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide.
Using the Sort Path By Option
When importing a DXF file that includes an array of dots, you can use the Sort Path By option to choose how the dot
pattern is ordered upon import.
The DXF file imported for this example has the dispense dot array shown below.
# Click Step Reference Image
1
• Click DXF.
The DXF screen appears in the Primary
View screen.
2
> >
• Open the DXF file you want to convert
to a program.
The file appears in the Primary View
screen.
• Click SELECT ALL.
• Click OPTION.
The Option window opens.
3
• Select the SORT PATH checkbox to
enable the Sort Path By feature.
• Select the X or Y radio button to specify
the direction for the dots to be arrayed.
• Enter the number of dots in the array. In
this example, there are 160 dots.
NOTE: Refer to for “Examples of How
the Sort By Path Option Affects DXF
Imports” on page133 for diagrams of
the resulting import for each selection.
4
• Select OK.
The commands for the imported DXF
appear in the Program screen based on
the selected Sort Path By options.
AppendixC, DXF File Import (continued)
GV Series Automated Dispensing Systems
133www.nordsonefd.com info@nordsonefd.com +1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide.
Using the Sort Path By Option (continued)
AppendixC, DXF File Import (continued)
Examples of How the Sort By Path Option Affects DXF Imports
DXF array import: Sort By Path disabled
A
B
C
D
1 2 3
4 5 6
7 8 9
DXF array import: Sort By Path X enabled
A
1
3
4
5
6
7
8
9
10
11
12
13
B
DXF array import: Sort By Path Y enabled
21 3
4 576 8 9 1011 12 13 14 15
GV Series Automated Dispensing Systems
134 www.nordsonefd.com info@nordsonefd.com +1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide.
AppendixD, QR Code Scanning Setup
Programs can be executed using a QR code scan. For the system to execute a program using a QR code, the
following must occur:
• A QR code for the workpiece must be present on the robot fixture plate surface (for example, on the workpiece
itself or on the workpiece fixture).
• QR code scanning must be enabled and each QR code must be associated with a program. Refer to the
procedure below.
NOTE: Bar codes are not supported.
To Enable QR Code Scanning
# Click Step Reference Image
1
>
• Click the SYSTEM SETUP tab, then click
OPEN.
2
• Check 2D CODE to enable QR code
scanning.
3
>
• Click the CAMERA tab and then click SETUP
at the top of the Camera screen.
The camera setup fields appear.
4
>
• Click the 2D CODE tab to open the code
setup fields, then check ENABLE THE
FUNCTION.