Nordson_EFD_GV_Series_Operating_Manual.pdf - 第23页
GV Series Automated Dispensing Systems 23 www.nordsonefd.com info@nordsonefd.com +1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide. Pr epare the W ork Surface Prepare the robot w…
GV Series Automated Dispensing Systems
22 www.nordsonefd.com info@nordsonefd.com +1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide.
Check the Camera and Dispenser Installation
To prevent damage to the camera, make sure the dispensing tip position is lower than bottom of the camera.
Example of correct pencil camera installation (dispensing tip lower than the bottom of the camera)
Tip bottom
Camera bottom
Work surface
Example of correct CCD camera installation (dispensing tip
lower than the bottom of the camera)
Example of correct CCD camera installation (higher than the
bottom of the tip) for a PICO
®
valve installation
Camera
focal
distance
Tip distance
from robot
work surface
(lower than
camera)
Tip bottom
Camera
focal
distance
Tip distance
from robot
work surface
(lower than
camera)
Tip bottom
GV Series Automated Dispensing Systems
23www.nordsonefd.com info@nordsonefd.com +1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide.
Prepare the Work Surface
Prepare the robot work surface for secure placement of the workpiece. You can place the substrate directly on the
work surface or mount a customized fixture plate on the work surface. Mounting hole templates are provided below.
G4V Fixture Plate Mounting Hole Template
NOTE: All dimensions are in mm.
GV Series Automated Dispensing Systems
24 www.nordsonefd.com info@nordsonefd.com +1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide.
Connect Inputs / Outputs (Optional)
All automated dispensing systems provide 8 standard inputs and 8 standard outputs. Connect input / output wiring
to the I/O PORT connection on the back of the GV operation box. For a wiring diagram, refer to “I/O Port” on
page95. There are several ways to use the system inputs / outputs. Refer to “Setting Up Inputs / Outputs” on
page58 for additional information on inputs / outputs.
G8V Fixture Plate Mounting Hole Template
NOTE: All dimensions are in mm.
Prepare the Work Surface (continued)