Nordson_EFD_GV_Series_Operating_Manual.pdf - 第134页

GV Series Automated Dispensing Systems 134 www.nordsonefd.com info@nordsonefd.com +1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide. AppendixD, QR Code Scanning Setup Programs c…

100%1 / 150
GV Series Automated Dispensing Systems
133www.nordsonefd.com info@nordsonefd.com +1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide.
Using the Sort Path By Option (continued)
AppendixC, DXF File Import (continued)
Examples of How the Sort By Path Option Affects DXF Imports
DXF array import: Sort By Path disabled
A
B
C
D
1 2 3
4 5 6
7 8 9
DXF array import: Sort By Path X enabled
A
1
3
4
5
6
7
8
9
10
11
12
13
B
DXF array import: Sort By Path Y enabled
21 3
4 576 8 9 1011 12 13 14 15
GV Series Automated Dispensing Systems
134 www.nordsonefd.com info@nordsonefd.com +1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide.
AppendixD, QR Code Scanning Setup
Programs can be executed using a QR code scan. For the system to execute a program using a QR code, the
following must occur:
• A QR code for the workpiece must be present on the robot fixture plate surface (for example, on the workpiece
itself or on the workpiece fixture).
• QR code scanning must be enabled and each QR code must be associated with a program. Refer to the
procedure below.
NOTE: Bar codes are not supported.
To Enable QR Code Scanning
# Click Step Reference Image
1
>
• Click the SYSTEM SETUP tab, then click
OPEN.
2
• Check 2D CODE to enable QR code
scanning.
3
>
• Click the CAMERA tab and then click SETUP
at the top of the Camera screen.
The camera setup fields appear.
4
>
• Click the 2D CODE tab to open the code
setup fields, then check ENABLE THE
FUNCTION.
GV Series Automated Dispensing Systems
135www.nordsonefd.com info@nordsonefd.com +1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide.
Appendix D, QR Code Scanning Setup (continued)
To Associate a QR Code with a Program
# Click Step Reference Image
1
• Jog the camera until it is centered over
the QR code you want to associate with a
program.
2
• Click SET to record the location.
The QR code location coordinates appear in
the BarCode Position fields.
3
• With the QR code in view and in focus, click
TEST to scan the QR code.
If the system cannot identify the QR code,
the Nan pop-up window appears.
4
• Adjust the THRESHOLD and EDGE
SMOOTH values:
- THRESHOLD: Range = 0–255
- EDGE SMOOTH: Range = 0–5
5
• Click TEST again.
When the system properly identifies the QR
code, a window like the one at right appears.
• Repeat steps 4 and 5 until the system
recognizes the QR code. After the QR code
is recognized, continue with the next steps
to associate it with a program.
6
• Click ADD TO LIST.
The Open file window appears.
7
>
• Select the dispense program to associate
with the QR code, the click OPEN.
The dispense program is now associated
with the QR code.
Continued on next page