3OM-1343-008_w.pdf - 第110页

3-25 AKFEDT -ID 1.2.3 (A03) PEC Recognition Mark Data (A03_01) Mark No. The mark Nos. correspond to the mark codes and the speci ﬁ ed parameters of each ﬁ ducial mark used in the PEC recognition function. 10 types of mar…

3-24

AKFEDT-ID

(A02_06)

Sequence

Set one of the following options to specify the timing of PEC

recognition implementation.

It is recommended that "After Pick Up" should be set in normal cases.

Note

The components must meet the following requirements.

When "After Pick Up" is selected, a component is picked up and the

component recognition is performed on the component while the PCB is

being transferred to the PCB positioning section.

Since the component is already picked up, it can be placed soon after the

PEC recognition operation is performed, shortening the time to ﬁ nish a

PCB.

Stage 1 and Stage 2

After Pick Up :

The PEC recognition operation is performed after a

component is picked up.

Before Pick Up :

The PEC recognition operation is performed before

a component is picked up.

This parameter should be selected when the PEC

recognition operation cannot be performed with a

component being picked up.

0601-002

1.2 Operation Data

3-25

AKFEDT-ID

1.2.3 (A03) PEC Recognition Mark Data

(A03_01)

Mark No.

The mark Nos. correspond to the mark codes and the speciﬁ ed

parameters of each ﬁ ducial mark used in the PEC recognition function.

10 types of mark codes can be registered for each pattern program.

(A03_02)

Mark Type

The following options can be selected as shapes of ﬁ ducial marks.

Table 3C1-1

Mark Type Shape

Round

Square

Equilateral Triangle (Up)

Cross

Rectangle

Checker (Square)

Diamond

Equilateral Triangle (Down)

Bow Tie

Checker (Rectangle)

Table 3C1-2

Mark Type Shape Mark Type Shape

Through Hole

Pad Mark

Through Hole (E) Pad Mark (E)

Through Hole (SE) Pad Mark (SE)

Through Hole (S) Pad Mark (S)

Through Hole (SW) Pad Mark (SW)

Through Hole (W)

Pad Mark (W)

Through Hole (NW) Pad Mark (NW)

Through Hole (N) Pad Mark (N)

Through Hole (NE) Pad Mark (NE)

0601-002

1.2 Operation Data

3-26

AKFEDT-ID

(A03_03)

Mark Sizes D1 [mm] and D2 [mm]

Set the size of the ﬁ ducial mark.

•

Data Input Range

Mark Size D1 :

0.50 to 3.00

Mark Size D2 :

0.00 to 3.00

Reference

Refer to "1.2.4 Fiducial Marks" for details.

(A03_04)

Angle [deg]

Set the angle at which a ﬁ ducial mark should be turned clockwise.

•

Data Input Range

0, 90, 180, 270

Note

(a) A numerical value must be entered in increments of 90°.

When a value other than the speciﬁ ed increments is entered, the

"Information" window appears, indicating that the entered value

(angle) is changed to "0°", "90°", "180°" or "270°".

(b) When "Thru Hole/Land" is selected in the "Mark Type" (A03_02)

combo box, the color of the angle cell is highlighted and "000.00" is

set in the "Angle [deg]" text box.

(A03_05)

Window Size [mm]

Set the recognition area (complete square) for the PEC recognition

function.

Set preferably small values to avoid false recognition and shorten

recognition time.

Fiducial Mark

Window Size

Fig. 3C23

•

Data Input Range

1.0 to 10.0

0601-002

1.2 Operation Data