3OM-1343-008_w.pdf - 第257页
6-26 AKFEDT -ID 0601-002 Head 1, Head 2, Head 3, and Head 4 Z [deg] The set parameters are used to adjust the angular deviations of the line connecting Nozzles 1 and 7 at the head rotational Z-phase position based on the…
6-25
AKFEDT-ID
2.1.9 Head Rotational Angle Axis Offset
When the "Head" tab is pressed in the "Device Offset" tab sheet and the "Hd
Rotate Axis" tab is selected, the following tab sheet appears.
Fig. 3F24 "Head Rotate Axis" Tab Sheet
0607-003
2.1 Device Offset Data
6-26
AKFEDT-ID
0601-002
Head 1, Head 2, Head 3, and Head 4
Z [deg]
The set parameters are used to adjust the angular deviations of the line
connecting Nozzles 1 and 7 at the head rotational Z-phase position
based on the machine coordinate reference.
When the line is tilted clockwise in the machine reference X/Y
coordinate system, a plus sign must be affi xed to the of
fset data.
Xm (+)
Ym (+)
Xm-Ym : Machine Reference
Coordinate System
1
2
3
4
5
6
7
8
9
10
11
12
1
2
3
4
5
6
7
8
9
10
11
12
DD Motor Z-Phase
Stop Position
DD Motor Z-Phase
Stop Position
DD (+)
DD (+)
Head Rotational Angle Offset
Head Rotational Angle Offset
Pm. Machine Reference
Coordinate Origin
Fig. 3F25
2.1 Device Offset Data
6-27
AKFEDT-ID
2.1.10 NL Origin Offset
When the "Head" tab is pressed in the "Device Offset" tab sheet and the "NL
Origin Ofst" tab is selected, the following tab sheet appears.
Fig. 3F26 "NL Origin Ofst" Tab Sheet
Head 1, Head 2, Head 3, and Head 4
L (Height) [mm]
The set parameters are used to correct the deviations between the nozzle
U/D mechanism and the nozzle roller caused while the NL axis is
rotating.
0607-003
2.1 Device Offset Data