3OM-1343-008_w.pdf - 第50页
Contents Cont-1 Page AKFE-ID 0607-003 Before Use ............................................................................................ 1 About the Instruction Manual ...............................................…
Safety Precautions
Safe-38
AKFE-ID
Power Failure
Instantaneous voltage drop due to power failure or lightning will cause the built-in
computer to break down and the basic and application programs to corrupt.
It is recommended that a DC uninterruptive power supply be used as a countermeasure
against instantaneous voltage drop.
Built-In Computer
A computer is built in the machine and used to control each internal mechanism of the
machine, save various data, and realize a user interface.
When the power switch of the machine is turned off while the computer is working
(computer being accessed), the computer may break down, causing the stored data and
application programs to corrupt.
Refer to "1.4.2 Power OFF" in "Chapter 2 (Vol. 1: Guide)" for how to turn off the power
switch of the machine.
Note on Startup Operation (Running-In Operation)
After the machine has been stopped for a long period of time, perform a running-in
operation for approximately 30 minutes to smoothly start up the machine.
Reference
Refer to "5. Running-In Operation" in "Chapter 2 (Vol. 1: Guide)" for the detailed
information on the running-in operation.
0607-003
Contents
Cont-1
Page
AKFE-ID
0607-003
Before Use ............................................................................................ 1
About the Instruction Manual ................................................................
2
Caution and Warning ............................................................................ 5
Limited Warranty ............................................................................ 5
Installation/Transfer and After-Sale Service ................................... 7
Requirements, Orientation, and Training for Operators ................. 7
About Specifi cation Change ........................................................... 8
About Disposal of Machine ............................................................ 8
Other Precautionary Items ............................................................. 8
Safety Precautions
1. About Safety Precaution Labels .....................................................Safe- 1
2. Common Precautionary Items ........................................................Safe- 3
Basic Precautions ..........................................................................Safe- 3
Precautions before Use ..................................................................Safe- 4
Notes on Machine Operations ........................................................Safe- 6
Notes on Installation, Transfer and Maintenance ...........................Safe- 7
Notes on Maintenance ...................................................................Safe- 8
3. Alert Indications in Instruction Manual ...........................................Safe- 9
Alert Indications described as "DANGER" .....................................Safe- 9
Alert Indications described as "WARNING" ...................................Safe- 10
Alert Indications described as "CAUTION" ....................................Safe- 12
4. Alert Labels ....................................................................................Safe- 15
Location of Alert Labels ..................................................................Safe-15
Alert Labels and Description ..........................................................Safe- 24
5. Precautionary Items for Correct Operations ...................................Safe- 34
Requirements for Installation .........................................................Safe- 34
Precautionary Measures before Installation ...................................Safe-35
Power Supply .................................................................................Safe- 36
Air Supply .......................................................................................Safe- 37
Data Backup Operation ..................................................................Safe-37
Computer Viruses ..........................................................................Safe- 37
Power Failure .................................................................................Safe- 38
Built-In Computer ...........................................................................Safe- 38
Note on Startup Operation (Running-In Operation) .......................Safe- 38
Contents ...............................................................................................Cont- 1
Contents
Cont-2
Page
AKFEDT-ID
0601-002
Chapter 1 Scope
1. Outline of Data ............................................................................... 1- 1
2. Outline of Pattern Program ............................................................ 1- 2
2.1 Composition of Pattern Program ............................................ 1- 2
2.1.1 Outline of Various Data .................................................. 1- 3
2.1.2 Input of Each Data ......................................................... 1- 3
2.2 Composition of Operation Data .............................................. 1- 4
2.3 Composition of Placement Head/Nozzle Data ........................ 1- 7
2.4 Composition of Placement Feeder Location Data .................. 1- 8
2.5 Composition of Placement Data ............................................. 1- 9
3. Outline of Component Library ........................................................ 1- 10
3.1 Purpose .................................................................................. 1- 10
3.2 Component IDs and Component Library Data ........................ 1- 10
4. Outline of Management Data ......................................................... 1- 11
5. Outline of System Setting ............................................................... 1- 13
Chapter 2 Basic Operations for Data Editing
1. Window Composition and Icons ..................................................... 2- 1
1.1 Window Composition .............................................................. 2- 1
1.2 Basic Icons ............................................................................. 2- 3
2. Method of Data Entry ..................................................................... 2- 5
2.1 How to enter numerical values ............................................... 2- 5
2.2 How to enter a string of characters ......................................... 2- 6
2.3 Data Entry with Touch Keypad for Data Editing ...................... 2- 8