3OM-1343-008_w.pdf - 第166页
4-A AKFEDT -ID 0601-002 Chapter 4 Component Library This chapter describes how to navigate in each window of "Component Library". Refer to another instruction manual of "Component Library (GXH Series)"…
3-80
AKFEDT-ID
•
Example of Block Sorting
(1) Classify the components that require the same outside diameters of the
nozzles into one.
Set the grouped components that require the smallest outside diameter
(nozzle) in the smallest P-No. step.
In the above example, C1 and C2 are set in P-Nos. 1 and 2.
(2) Set "1" in the "C" text box of P-No. 3 and "0" (zero) in the other text
boxes of the step line.
This step is regarded as a delimit of one group.
Note
(a) No components are placed for the delimit step.
(b) Any number (0 to 9) can be used as a control command.
"1" is used in the above example.
(3) Keep the same procedure to make each step as follows.
•
Set "C3" and "C4" in the "Comment" text boxes of P-Nos. 4 and 5.
•
Set "2" in the "C" text box of P-No. 6 and "0" (zero) in the other
text boxes of the step line.
•
Set "C5" and "C6" in the "Comment" text boxes of P-Nos. 7 and 8.
(4) Create the last step in the same way as a normal program. Be sure to set
"P" as a control command in the "C" text box.
Note
Up to 20 groups can be created in one pattern program.
0601-002
3.5 Placement Data for Block Sorting Function
4-A
AKFEDT-ID
0601-002
Chapter 4
Component Library
This chapter describes how to navigate in each window of
"Component Library".
Refer to another instruction manual of "Component
Library (GXH Series)" for the detailed information on the
component library data and how to create it.
•
Selection of Component IDs
•
Editing of Component Library Data
4-B
AKFEDT-ID
0601-002