00198631-03_AI_Smart-Pin-Support_TX_DE_EN.pdf - 第44页
44 Assembly Instructions / Montageanleitung SIPLACE TX V2 Series Smart Pin Support 07/2021 Contents 4 Appendix .. 79 4.1 Circuit Diagrams .. 79
43Assembly Instructions / Montageanleitung SIPLACE TX V2 Series Smart Pin Support 07/2021
Contents
Contents
1 Introduction.. 45
1.1 Safety instructions.. 45
1.1.1 Conventions for the use of safety instructions and symbols.. 45
1.1.2 Safety instructions for working with strong magnetic fields.. 46
1.1.3 Safety instructions for the power supply (with SMPS).. 46
1.1.4 Safety instructions for the compressed air supply.. 48
1.1.5 Safety instructions for the gantry.. 48
1.1.6 Safety instructions on hazardous materials.. 48
1.2 Preparatory work..... 49
1.3 Other instructions.. 50
1.3.1 Environmentally-friendly disposal of materials and components.. 50
1.3.2 Use of original accessories and spare parts.. 51
1.3.3 ESD guidelines.. 51
1.3.3.1 What does ESD mean?.. 51
1.3.3.2 Important measures to protect against static charging.. 51
1.3.3.3 Handling ESD modules.. 51
1.3.3.4 Measurements and modifications to ESD modules.. 51
1.3.3.5 Dispatching ESD modules.. 52
1.3.4 Validity of document.. 52
1.3.5 Release history.. 52
1.4 Abbreviations.. 53
2 Brief Description.. 55
2.1 Product Description.. 55
2.1.1 Configurations.. 56
2.2 Prerequisites and restrictions.. 57
2.3 Scope of Delivery.. 58
2.3.1 Parts required for the SPS option in SIPLACE TX V2 machines with SIPLACE Tray Unit installed..
59
2.4 Tools and Equipment Required.. 59
2.5 Required Working Time.. 59
3 Installation.. 61
3.1 Preparatory Steps.. 61
3.2 Converting the machine zero point.. 61
3.3 Gantry 1.. 63
3.3.1 Converting the Y axis buffer.. 63
3.3.2 Converting the X axis buffer.. 63
3.3.3 Preparing the gantry.. 64
3.3.4 Installing the pin picker.. 66
3.4 Gantry 2.. 70
3.4.1 Converting the X axis buffer.. 70
3.4.2 Preparing the gantry.. 72
3.4.3 Installing the pin picker.. 73
3.5 Smart Pin Magazine T5 (PinFeeder).. 75
3.6 Final work.. 76
3.6.1 Calibrating the pin pickers, lifting tables and pin feeders.. 77
1 Introduction
1.1 Safety instructions
Assembly Instructions / Montageanleitung SIPLACE TX V2 Series Smart Pin Support 07/2021 45
1 Introduction
This manual describes installation of the "Smart Pin Support" option in SIPLACE® TX2/TX2iV2
machines.
1.1 Safety instructions
DANGER
Nonobservance of these safety instructions may cause injury to personnel and dam-
age to the machine!
► Please observe the safety instructions in the user manual of the relevant machine
for all work!
1.1.1 Conventions for the use of safety instructions and symbols
Safety instructions
This manual contains notes that must be observed to guarantee your personal safety and to avoid
damage to equipment. These notes are highlighted by warning triangles and are indicated as fol-
lows according to the level of risk:
DANGER
Definition
For the purposes of this manual, this indicates that fatal or severe injuries or considerable
damage to property will occur if this hazard warning is not observed.
WARNING
Definition
For the purposes of this manual, this indicates that fatal or severe injuries or considerable
damage to equipment may occur if these warning instructions are not followed.
CAUTION
Definition
For the purposes of this manual, this indicates that minor injuries or damage to property
may occur if this caution is not observed.
NOTICE
Definition
For the purposes of this manual, this note provides information about the product or indic-
ates a part of the manual that requires particular attention.
Symbols
Example Description
Next This typeface marks controls and interface elements in the software.
► This symbol indicates actions that have to be performed by the operator.