00198631-03_AI_Smart-Pin-Support_TX_DE_EN.pdf - 第59页
2 Brief Description 2.4 Tools and Equipment Required Assembly Instructions / Montageanleitung SIPLACE TX V2 Series Smart Pin Support 07/2021 59 2.3.1 Parts required for the SPS option in SIPLACE TX V2 machines with SIPLA…
2 Brief Description
2.3 Scope of Delivery
58 Assembly Instructions / Montageanleitung SIPLACE TX V2 Series Smart Pin Support 07/2021
2.3 Scope of Delivery
Smart Pin Support SIPLACE TX [00588320-xx]
Quantity Designation Item no.
1 Upgrade kit SPS P1 TX V2 03171221-xx
2 ISO 4762 - M 3 x 22-A2-70 03064919-xx
1 Air connection X-Motor SPS P1 TX 03210185-xx
1 SPS P1 TX V2
Contains, for example, connection cable SPS TX V2
[03208588‑xx]
03165096-xx
1 Y center stop assembly SPS TX V2 03167896-xx
1 Space to bottom buffer complete SPS P1 03210576-xx
2 ISO 4762 - M 3 x 12-A2-70 03042544-xx
2 TORX-ISO7380-2 - M3x6 - A2-70 03119157-xx
1 ISO 4762 - M 4 x 14-A2-70 03043116-xx
0.31 m Silicone hose. Di 8 Da 12 electrically conductive 03006727-xx
1 Upgrade kit SPS P2 TX V2 03171222-xx
1 SPS P2 TX V2
Contains, for example, connection cable SPS TX V2
[03208588‑xx]
03164367-xx
1 Spacer top buffer SPS P2 03170394-xx
1 Spacer bottom buffer SPS P2 03170316-xx
2 ISO 4762 - M 3 x 12-A2-70 03042544-xx
2 TORX-ISO7380-2 - M3x6 - A2-70 03119157-xx
1 ISO 4762 - M 4 x 14-A2-70 03043116-xx
2 Pin garage X 03170868-xx
2 Smart Pin Support set standard pins 5 pieces 00119995-xx
1 Reference position with SPS TX V2 03169888-xx
You also need the following:
Quantity Designation Item no.
1 Allen key shortened (5 mm)
Optional
You can order the following parts separately:
Designation Item no.
Pin magazine T5 Plus (pin feeder, (1 piece) 00588322-xx
Smart Pin Support set standard pins (5 pieces) 00119995Sxx
2 Brief Description
2.4 Tools and Equipment Required
Assembly Instructions / Montageanleitung SIPLACE TX V2 Series Smart Pin Support 07/2021 59
2.3.1 Parts required for the SPS option in SIPLACE TX V2 machines with SIPLACE
Tray Unit installed
If the SIPLACE TX2 V2 has a SIPLACE Tray Unit installed, the SPS option can only be fitted at
gantry 2.
This configuration is possible in SIPLACE Pro from version 19.0 onwards and from station software
715.0.
Installation of the pin picker would reduce the X travel range and is therefore not possible for
machines with a SIPLACE Tray Unit.
If using this configuration, the following parts would need to be ordered separately:
Quantity Name Item no.
1 Pin garage X 03170868-xx
x Smart Pin Support set standard pins 5 pieces 00119995-xx
1 Upgrade kit SPS P2 TX V2 03171222-xx
Special instructions for assembly
Fit these parts as described in the following chapters.
Pay attention to the following special instructions:
► The machine zero point holder may not be replaced with the longer holder (reference position
with SPS TX V2 [03169888‑xx]).
Fig.9: Setting
► Set the hardware configuration Single
Side (location2).
2.4 Tools and Equipment Required
T Standard tooling
T Rubber mallet
T 00376625Sxx Torque wrench 2.5-25 Nm with ratchet insert 1/4 inch
T07 03078400-xx Torque Screwdriver ESD 1.0-5.0 Nm
T78 03090019-xx Torque interchangeable blades 2.5 mm, hexagonal
T79 03109522-xx torque allen swap blade 3 mm
C08 00308458-xx Cable ties B=2.5mm, L=102mm Panduit
C38 00334892-xx LOCTITE 243 Screw locking
00198632-xx User manual "Operating and Configuring the SIPLACE Smart Pin Support
TX V2"
2.5 Required Working Time
Installing the hardware will take approx. 3 hours in total, installing the software approx. 1 hour.
2 Brief Description
2.5 Required Working Time
60 Assembly Instructions / Montageanleitung SIPLACE TX V2 Series Smart Pin Support 07/2021