CP6的IO代码.pdf - 第133页
Part 3 Chapter 3 Replacing Consumable Parts Edition 1.1 3-3-4 CP-6-series Mechanical Reference 3.3 Vision Processing UV Lamp Replacement Point Oil from the skin may weaken the glass over time, reducing its lifespan. Proc…
Part 3 Chapter 3 Replacing Consumable Parts
Edition 1.1 3-3-3 CP-6-series Mechanical Reference
Part Numbers for the Nozzles and Reflective Disks
φ0.7
φ1.0
φ1.3
φ1.8
φ2.5
φ3.75
φ2.5
φ3.75
φ5.0
φ5.0
φ7.0
φ7.0
φ10.0
AWPH9512
AWPH9522
AWPH9532
AWPH9552
AWPH9562
AWPH9572
AWPH9582
AWPH9602
AWPH9612
AWPH9662
AWPH9682
AYPH9512 *
AYPH9534 *
φ12
φ12
φ12
φ12
φ20
φ16
φ16
φ20
❒20
❒22
❒22
❒29
❒29
LPH5012
LPH5022
LPH5032
LPH5042
WPH8201
WPH8211
WPH8081
WPH8121
WPH8101
WPH8231
WPH8181
YPH8061
YPH8570
φ5.0 AWPH9672 ■22 WPH8221
φ7.0
φ7.0
AWPH9694
AYPH9524 *
■22
■29
WPH8081
YPH8580
CP6M3057Ea
Nozzle
size
Nozzle Assy No.
Reflective
disk size
Reflective
disk No.
For backlightFor frontlight
* Applies to the 5000-series nozzles.
Part 3 Chapter 3 Replacing Consumable Parts
Edition 1.1 3-3-4 CP-6-series Mechanical Reference
3.3 Vision Processing UV Lamp Replacement
Point
Oil from the skin may weaken the glass over time, reducing its lifespan.
Procedure
Warning
Always be sure to cut out the main power before carrying out any
work.
Remove the UV lamp by turning it and pulling it out.
Note : Avoid direct contact with the glass.
UV lamp
CP6M3058
Part 3 Chapter 3 Replacing Consumable Parts
Edition 1.1 3-3-5 CP-6-series Mechanical Reference
3.4 Replacing the Waste Tape Cutter
Point
If waste tape is not being cut properly, tape feed may jam. In such cases, replace the
waste tape cutter.
Procedure
Warning
• Confirm that the power is off before work is started.
• Exercise extreme caution when working on the machine if the cam is
not at its origin (0 deg.). Recoil of the cam axis can endanger the
operator.
Remove the cutter by unscrewing the two bolts on the moving and two bolts on the fixed
cutter. Put in a new cutter and re-tighten the two bolts.
Movable blade
Fixed blade
CP6M3059