CP6的IO代码.pdf - 第266页

1.4 Loading W8, W12 mm Feeders 1.4.1 Loading Procedures 1. Unlock the tape leaf by moving the tape leaf lock in the direction of the arrow. When finished, raise up the tape leaf in the direction of the arrow as shown. Op…

1.3 W32 Feeder Part Names (Paper) (used only in Japan)

Compatible tape types : W32 x P12 (Paper)

Feeder Part Names

Tape feeding lever

Tape leaf

Tape feed sprocket

Holder

Take-up reel

Roller 3

Roller 2

Parts reel

CP6M8003

Part 8 Chapter 1 WC Feeders

Edition 1.0 8-1-3 CP-6 Series Mechanical Reference

1.4 Loading W8, W12 mm Feeders

1.4.1 Loading Procedures

1. Unlock the tape leaf by moving the tape leaf lock in the direction of the arrow.

When finished, raise up the tape leaf in the direction of the arrow as shown.

Opening the Tape Leaf

2. Set the parts reel in the holder. When loading, check that the holes (feeding holes)

in the tape are on the left side as shown.

Setting the Parts Reel (7 inch holder)

Parts tape

Holder

Parts reel

Feed hole

CP6M8005

Tape leaf

Tape leaf lock

CP6M8004

Part 8 Chapter 1 WC Feeders

Edition 1.0 8-1-4 CP-6 Series Mechanical Reference

i) Using 13 inch parts reels

ii) Using 7 inch parts reels

Setting the Parts Reel (13 inch holder)

Note: If the roller position is not changed, the parts reel will fall off during operation.

Change the roller

position

CP6M8007

Parts tape

Parts reel

Holder

CP6M8006

Part 8 Chapter 1 WC Feeders

Edition 1.0 8-1-5 CP-6 Series Mechanical Reference