CP6的IO代码.pdf - 第15页

Contents – List of Current Pages Edition 1.4 xii CP-6-series Mechanical Reference Notes :

Part 10 Carrier Type Loading System

1. Carrier Type Loading System................................(Edition 1.0) ....10-1-1

2. In-Conveyor...........................................................(Edition 1.0) ....10-2-1

2.1 Adjustment of the Lifter Air Cylinder Sensors...............................................10-2-3

2.2 Mid-Stopper Position Alignment ...................................................................10-2-4

3. In-Carrier...............................................................(Edition 1.4) ....10-3-1

3.1 Adjustment of the In-Carrier Open/Close Limit Sensors...............................10-3-2

4. Main Conveyor......................................................(Edition 1.0) ....10-4-1

4.1 Adjustable Rail Engagement Sensor............................................................10-4-2

4.1.1 Safety Measures ........................................................................10-4-3

4.1.2 Adjusting the Sensor Position ....................................................10-4-4

4.1.3 Adjusting the Sensor Sensitivity (Amplifier Unit) ........................10-4-5

4.2 Adjustment of the Clamper Open/Close Limit Sensors ................................10-4-6

5. Out-Carrier............................................................(Edition 1.4) ....10-5-1

5.1 Adjustment of the Out-Carrier Open/Close Limit Sensors............................10-5-2

6. Out-Conveyor........................................................(Edition 1.0) ....10-6-1

6.1 Adjustment of the Lifter Air Cylinder Sensors...............................................10-6-2

6.2 Mid-Stopper Position Alignment ...................................................................10-6-3

7. Setting the Board Positioning Pins........................(Edition 1.0) ....10-7-1

Part 11 Supplementary Information

1. Vibration Reduction Unit (CP-642E, CP-643E).....(Edition 1.0).....11-1-1

1.1 Nomenclature ...............................................................................................11-1-1

1.2 Purpose and Operating Principle of Unit ......................................................11-1-2

1.3 Installation Procedure...................................................................................11-1-3

1.4 Air Valve Modification and Adjustment.........................................................11-1-5

1.5 Changing the Conveyor Link Bracket...........................................................11-1-6

2. Noise Levels..........................................................(Edition 1.0).....11-2-1

Appendix Electronic Temperature Controller

A. Functions of Electronic Temperature Controller ...(Edition 1.0).........A-1

B. Directions for Use.................................................(Edition 1.0).........B-1

C. Troubleshooting....................................................(Edition 1.0).........C-1

Contents – List of Current Pages

Edition 1.4 xi CP-6-series Mechanical Reference

Contents – List of Current Pages

Edition 1.4 xii CP-6-series Mechanical Reference

Notes :

Safety Guidelines

Fuji machines are designed and produced with safety as

one of our main considerations. However, even a

perfectly designed machine can be damaged, or someone

can still be injured if the user does not follow the safety

rules. It is the responsibility of the user to make sure all

safety rules are followed during operation and

maintenance.

Be sure to read these safety rules before operating the

machine.