CP6的IO代码.pdf - 第311页

6. Replace the sprocket. Be careful not to lose the 2 thin washers that are located on each side of the sprocket. Caution : Take care not to misplace the spacer. When removing the sprocket, be sure not to bend the link. …

4. Remove the spring used for the stopper. This is easy to remove when using a

pencil/pen or other pointed instrument. Because the spring is small, be careful

not to lose it.

Caution : Take care not to misplace the spring.

Removing the Sprocket Stopper Spring

5. Use a 8 mm box wrench to remove the nut and then remove the pin.

Caution : Do not loosen the eccentric pin tightening nut.

Removing the Pin

Wrench

Eccentric pin tightening nut

Nut

CP6M8074

Sprocket stopper spring

CP6M8073

Part 8 Chapter 2 Feeder Maintenance

Edition 1.0 8-2-2 CP-6 Series Mechanical Reference

6. Replace the sprocket. Be careful not to lose the 2 thin washers that are located on

each side of the sprocket.

Caution : Take care not to misplace the spacer.

When removing the sprocket, be sure not to bend the link.

Replacing the Sprocket

7. Remove the lever position pin and the joint pin. When the nuts are loosened, the

pin can be removed.

Removing the Link Assembly

Joint pin

Link Assembly

Nut

Lever position pin

CP6M8076

Spacer

Link

Sprocket

CP6M8075

Part 8 Chapter 2 Feeder Maintenance

Edition 1.0 8-2-3 CP-6 Series Mechanical Reference

8. Remove the flush screws that fix the bracket and then remove the bracket. On the

bracket, there are 2 extruded studs pressed in to the main feeder body that are

used for positioning. Be careful not to damage these studs. Use a flat driver or

other type of tool in removing the bracket. Take care not to damage the bracket or

scar the feeder. Also take care not to lose the collar that is between the bracket and

the feeder body.

Removing the Bracket

9. Replace the link assembly.

Replacing the Feed Jaw Spring

10. Replace the feed jaw spring.

Follow these procedures in reverse to assemble.

Feeding jaw spring

Link assembly

CP6M8078

Extruded studs

Collar

Link assembly

Bracket

Flush screw

Extruded studs

CP6M8077

Part 8 Chapter 2 Feeder Maintenance

Edition 1.0 8-2-4 CP-6 Series Mechanical Reference