CP6的IO代码.pdf - 第274页

3. Slide the tape under the tape leaf and pull it to the tip of the feeder. Insert the top- film into the slit in the tape leaf. Setting the T op-film 4. Align the feed holes of the parts tape with the sprocket. Keep the…

Setting the Parts Reel (15 inch holder)

Note: The 15 inch type reel holder is only used on 12 mm and 16 mm feeders. It is used only for

15 inch reels which supply aluminum condenser components. Because the 15 inch type

reel holder does not have rollers. It is necessary to use the center pin.

Parts tape

Feed hole

Parts reel

Holder

Groove

When loading components,

insert the pin into the center

hole of the parts reel,

align the grooves on the pin

with the slots on the holder

and slide to the bottom-

most point of the holder.

CP6M8017

Part 8 Chapter 1 WC Feeders

Edition 1.0 8-1-11 CP-6 Series Mechanical Reference

3. Slide the tape under the tape leaf and pull it to the tip of the feeder. Insert the top-

film into the slit in the tape leaf.

Setting the Top-film

4. Align the feed holes of the parts tape with the sprocket. Keep the pick-up position

in mind when aligning the tape to the sprocket.

Setting the Parts Tape

Pick-up point

CP6M8019

Parts tape

Slit

Top-film

CP6M8018

Part 8 Chapter 1 WC Feeders

Edition 1.0 8-1-12 CP-6 Series Mechanical Reference

5. Make sure that the feed holes line up with the sprocket, pull the top-film out of the

way, lower the tape leaf, and press the catch pins simultaneously to lock the tape

leaf into place.

Before the tape leaf is completely closed, adjust the shutter position so that the cut-

out on the shutter engages with the pin on the arm.

If an arrow, " ▼ ", is marked on the tape leaf, slide the shutter until the arrow

meets the pin.

Note: If excessive force is applied to the tape leaf without aligning the cut-out with the pin, the

tape leaf will not be properly locked, or it will be deformed, resulting in a reduced pick-up

rate.

Closing the tape leaf

Tape leaf

Shutter

Catch pin

Cut-out

Align the arrow mark "▼"(or the cut-out)

and the pin on the shutter before locking.

Arrow mark

CP6M8020

Part 8 Chapter 1 WC Feeders

Edition 1.0 8-1-13 CP-6 Series Mechanical Reference