OM-1271-003_w.pdf - 第12页
9 Tg1097-ID-OP 3. Rough View 0708-003 3. Rough V iew Nozzle Arrangement on Head (Three nozzles connected in series) Fig. 1
8
Tg1097-ID-OP
Item Description Special Item
7. Placement
Heads
Vacuum Nozzle: Max. 3 nozzles
Ref. :
Number of Component Picks :
Component Size 26.2
×
26.2 mm or less 3
to 55
×
55 mm or less 2
Note :
For components not within the above ranges, the number of
components to be picked up should be "1".
(Case such the connector size 100
×
26 mm, etc.)
8. Nozzle Stocker
(Housing)
Max. 9 nozzles can be stored.
Note :
Use the multi-functional nozzle stocker.
9. Mass Multi-Functional Head : Approx. 8 kg
Multi-Functional Nozzle Stocker : Approx. 6.2 kg
10. Dimensions
Multi-Functional Head :
Approx. 212 (width)
×
363 (depth)
×
346 (height) mm
Multi-Functional Nozzle Stocker :
Approx. 300 (width)
×
120 (depth)
×
258 (height) mm
11. Others • Applicable to the components to be inserted under pressure
• Mechanical grip (option)
2.1 Standard Accessory Parts List
Table 1
No. Product Name Part No. Part Name Q'ty Remarks
1 Vacuum Filter 630 069 5816 AIR LINE EQPT 15
2 Jig for Vacuum Filter Replacement 630 076 6691 TOOL, HAND 1
2. Specifications
0708-003
9
Tg1097-ID-OP
3. Rough View
0708-003
3. Rough View
Nozzle Arrangement on Head
(Three nozzles connected in series)
Fig. 1
10
Tg1097-ID-OP
4. Installation Position
0411-002
4. Installation Position
A multi-functional head can be attached to any beam to replace a high-speed
head.
Also, a multi-functional head can be combined with a high-speed head in a
single stage.
(Front Side of Machine)
(Rear Side of Machine)
Nozzle Stocker
Multi-Functional Head
Fig. 2