OM-1271-003_w.pdf - 第42页
39 Tg1097-ID-OP 0708-002 1 1.3 Inspection, Cleaning, and Lubrication Spots 1 1.3 Inspection, Cleaning, and Lubrication Spots 1 1.3.1 Nozzle Stocker (1) W ipe off old grease with an oiled rag. T ake ample care not to leav…
38
Tg1097-ID-OP
0708-002
11.2 Understanding of Maintenance Items on Each Section
11.2 Understanding of Maintenance Items on Each Section
Clarified in this session are each individual spots of the machine to be
maintained.
Refer to "10. Maintenance Check List" for periodic maintenance.
View of Inspection, Cleaning, and Lubrication Spots
(Example of Identification)
Nozzle Storage Section
Every Month Cleaning
Wipe off dirt and dust with a rag.
[1] [2] [3]
Cam Follower
Every Month Cleaning and Lubrication
(DAPHNE EPONEX GREASE No. 1)
Note
(1) Wipe off old grease with an oiled rag.
Take ample care not to leave
the waste threads after the
old grease is wiped off.
(2) Apply new grease by hand or with
a brush.
Fig. 13
[1]:
Maintenance Spot
[2]:
Cycle and Contents of Maintenance
[3]:
Details of Maintenance
39
Tg1097-ID-OP
0708-002
11.3 Inspection, Cleaning, and Lubrication Spots
11.3 Inspection, Cleaning, and Lubrication Spots
11.3.1 Nozzle Stocker
(1) Wipe off old grease with an oiled rag.
Take ample care not to leave
the waste threads after the
old grease is wiped off.
(2) Apply new grease by hand or with
a brush.
Nozzle Storage Section
Every Month Cleaning
Wipe off dirt and dust with a rag.
Cam Follower
Every Month Cleaning and Lubrication
(DAPHNE EPONEX GREASE No. 1)
Note
Fig. 14 Nozzle Stocker
40
Tg1097-ID-OP
0708-002
11.3 Inspection, Cleaning, and Lubrication Spots
11.3.2 Vacuum Nozzle
Inside the Vacuum Nozzle
Every Month Cleaning
Blow air into the vacuum hole.
Vacuum Nozzle Hole
Every Month Cleaning
Blow air into the vacuum hole.
Vacuum Nozzle End
Every Month Cleaning
Clean it with a rag.
Diffusion Plate
Upper Surface of Diffusion Plate
Every Week Inspection/Cleaning
Check that no dirt and dust adheres to the �
upper surface of the diffusion plate.
If necessary, wipe them off with the lens
cleaning cloth.
Never use neither solvent nor �
ethanol.
Otherwise, the diffusion plate �
may crack.
Lower Surface of Diffusion Plate
Every Week Cleaning
When dirt and dust have accumulated on �
the lower surface of the diffusion plate, �
wipe them off with the lens cleaning cloth.
Never use neither solvent nor �
ethanol.
Otherwise, the diffusion plate �
may crack.
Notice
Notice
Fig. 15 Vacuum Nozzle