OM-1271-003_w.pdf - 第5页
2 Tg1097-ID-SO 0407-001
1
Tg1097-ID-OP
Before Use
We are grateful to you for purchasing Hitachi direct-drive moduler mounter (chip
mounter) multi-functional head.
Before using this products, please read this instruction manual carefully to fully
understand the instructions and precautionary measures for safety purposes.
Always keep the instruction manual at hand.
1. The safety precautions are expressed, using the combinations of safety alert symbols
" " and headwords such as "DANGER", "WARNING", or "CAUTION" according
to the degree of danger.
Please fully understand the meaning of each precautionary item for safety purposes.
The safety alert symbols
" "
are used to indicate a potential
personal
injury
hazard.
Please pay attention to all safety messages that follow the safety alert symbols to
avoid any possibility of injury or death.
DANGER
This indicates an imminently hazardous situation
which, if not avoided, will result in death or serious
injury.
WARNING
This indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
CAUTION
This indicates a potentially hazardous situation which, if
not avoided, may result in injury or physical damage.
2. Explained in this manual are only the items different from those in the instruction
manual of the main machine.
Use the instruction manual of the main machine together with this manual.
0411-002
2
Tg1097-ID-SO
0407-001
Contents
3
Page
Tg1097-ID-OP
0708-003
Before Use ............................................................................................. 1
Contents .............................................................................................. 3
1. Scope ............................................................................................. 5
2. Specifications ................................................................................. 5
2.1 Standard Accessory Parts List ................................................ 8
3. Rough View .................................................................................... 9
4. Installation Position ........................................................................ 10
5. Nozzle Change in the "Set-up" Operation ...................................... 11
6. Nozzle Change in the Manual Operation ....................................... 14
7. Placement Head/Nozzle Data ........................................................ 16
8. Teaching ......................................................................................... 17
8.1 Head Rotation Angle Axis ....................................................... 17
8.2 Head Rotation Center Offset
/Basis Mark Position Teaching ............................. 19
8.3 Nozzle Stocker Offset ............................................................. 23
8.4 Head Nozzle Inclination Offset ............................................... 28
9. Periodic Maintenance ..................................................................... 31
9.1 Precautionary Items before Maintenance ............................... 31
9.2 Preparation for Maintenance .................................................. 32
9.2.1 Preparation for Cleaning ................................................ 32
9.2.2 Preparation for Lubrication ............................................ 33
10. Maintenance Check List ................................................................. 35
10.1 Weekly Maintenance .............................................................. 35
10.2 Monthly Maintenance .............................................................. 35
10.3 Quarterly Maintenance ........................................................... 36
11. Maintenance Spots ........................................................................ 37
11.1 Whole View ............................................................................. 37
11.2 Understanding of Maintenance Items on Each Section .......... 38
11.3 Inspection, Cleaning, and Lubrication Spots .......................... 39
11.3.1 Nozzle Stocker .............................................................. 39
11.3.2 Vacuum Nozzle .............................................................. 40
11.3.3 Placement Head ............................................................ 41
12. Replacement Procedure of Vacuum Filter ..................................... 43
13. List of Consumables ....................................................................... 45
14. Pneumatic Diagram ........................................................................ 47