OM-1271-003_w.pdf - 第38页

35 Tg1097-ID-OP 0708-002 10. Maintenance Check List 10. Maintenance Check List This session describes how to perform the maintenance work periodically . Use the tables below as check lists. Reference Refer to "1 1. …

100%1 / 85
34
Tg1097-ID-OP
0708-002
9.2 Preparation for Maintenance
Specified lubrication tools
(1) Brush
Use a brush whose bristles do not come off if possible.
(2) Vinyl Gloves
Use a pair of vinyl gloves to apply grease and oil by hand.
(3) Syringe
Standard : 10 ml SS-10-LZ
Part No. : 630 133 3793
Maker : TERUMO CORPORATION
Appearance
1
2
3
4
5
6
7
8
9
10
12
mL
SINGLE USE ONLY
TERUMO
Fig. 9
Table 3
Standard Shape Part No. Remarks
Syringe 630 133 3793
Maker
: TERUMO CORPORATION
10 ml SS-10-LZ
No.19
(Color : Brown)
630 062 2621
Maker
: Nipro
Inside Diameter
: φ0.79
Length
: 65 mm Flattened End
35
Tg1097-ID-OP
0708-002
10. Maintenance Check List
10. Maintenance Check List
This session describes how to perform the maintenance work periodically.
Use the tables below as check lists.
Reference
Refer to "11. Maintenance Spots" for the spots to be maintained.
Note
DE1 : DAPHNE EPONEX GREASE No. 1
10.1 Weekly Maintenance
Table 4
Maintenance Spots
Description
Grease
Cleaning Tools,
Nozzles, etc.
Check
Name
DWG No.
11.3.2 Vacuum Nozzle Diffusion Plate
(Lower Surface)
Fig. 15 Cleaning - Lens Cleaning
Cloth
Diffusion Plate
(Upper Surface)
Fig. 15 Inspection,
Cleaning
- Lens Cleaning
Cloth
10.2 Monthly Maintenance
Table 5
Maintenance Spots
Description
Grease
Cleaning Tools,
Nozzles, etc.
Check
Name
DWG No.
11.3.1 Nozzle Stocker Nozzle Storage
Section
Fig. 14 Cleaning - Rag
Cam Follower Fig. 14 Cleaning,
Lubrication
DE1 Oiled Rag, Brush
11.3.2 Vacuum Nozzle
Inside the
Vacuum Nozzle
Fig. 15 Cleaning - Air Gun
Vacuum Nozzle
Hole
Fig. 15 Cleaning - Air Gun
Vacuum Nozzle
End
Fig. 15 Cleaning - Rag
11.3.3 Placement Head Vacuum Filter
Fig. 17 Inspection - Vacuum Filter,
Vacuum Filter
Replacement Jig
36
Tg1097-ID-OP
0708-002
10.3 Quarterly Maintenance
10.3 Quarterly Maintenance
Notice
Lubrication must be made on the *-marked items after initial month and
every 3 months for the subsequent use.
Table 6
Maintenance Spots
Description
Grease
Cleaning Tools,
Nozzles, etc.
Check
Name
DWG No.
11.3.3 Placement Head * Linear Guides Fig. 16 Lubrication DE1
Syringe
, Nozzle
(No.19)
* Ball Screw Fig. 16 Lubrication DE1
Syringe
, Nozzle
(No.19)
Saucer Fig. 16 Cleaning - Oiled Rag