OM-1271-003_w.pdf - 第35页

32 Tg1097-ID-OP 0708-002 9.2 Preparation for Maintenance 9.2 Preparation for Maintenance 9.2.1 Preparation for Cleaning Prepare the following items. • Rag Use a rag made of such material as cotton, etc., that produces as…

100%1 / 85
31
Tg1097-ID-OP
0708-002
9. Periodic Maintenance
9. Periodic Maintenance
9.1 Precautionary Items before Maintenance
This session describes how to perform inspections, cleaning, lubrication, and
adjustment to keep the machine in good shape.
It is recommended that periodic maintenance of the machine should be
ensured.
WARNING
• Only qualified personnel should perform the maintenance
work carefully for the machine in compliance with the
specified instructions.
WARNING
• Before performing any maintenance work, be sure to lock
the power breaker and the air source with padlocks.
Power Breaker : Set the power breaker to the "OFF" side
and lock it with a padlock.
Air Source : Stop the air supply and set the main
valve to the "EXH." side. After that, be
sure to lock it with a padlock.
• Designate a person who can have charge of the padlock
key.
• If the provided padlock is lost or damaged, purchase its
substitute.
32
Tg1097-ID-OP
0708-002
9.2 Preparation for Maintenance
9.2 Preparation for Maintenance
9.2.1 Preparation for Cleaning
Prepare the following items.
• Rag
Use a rag made of such material as cotton, etc., that produces as less waste
thread as possible.
Notice
If any fiber is left, it might cause the system breakdown.
• Oiled Rag
Use a rag made of such material as cotton, etc., that produces as less waste
thread as possible.
Too much grease should not be applied and any different type of grease
should not be mixed into the specified one.
Notice
If any fiber is left, it might cause the system breakdown.
• Air Gun
Do not use the air gun for any spots than the specified ones.
If dirt and dust are dispersed, they may adhere to the sensors and moving
mechanisms, causing the machine to break down.
Fig. 8
33
Tg1097-ID-OP
0708-002
9.2 Preparation for Maintenance
9.2.2 Preparation for Lubrication
Prepare for the specified types of grease and lubrication tools.
Specified Greases
•
DAPHNE EPONEX GREASE No. 1 (IDEMITSU KOSAN)
Note
Before lubrication, wipe off old grease. Otherwise, the effect of grease and
oil will decrease.
Same Types of Lubricants
•
Grease Types equivalent to DAPHNE EPONEX GREASE No. 1
(IDEMITSU KOSAN)
Table 2
Grease Names Makers
Alvania Grease No. 1 Showa Shell Sekiyu K.K
Multinoc Grease No. 1 NIPPON OIL CORPORATION
Jomo Lisonix Grease No. 1 JAPAN ENERGY CORPORATION
Dynamax No. 1 COSMO OIL LUBRICANTS CO., LTD.
Lithtan No. 1 ESSO OIL
MP Grease No. 1
KYGNUS
Gemico MP No. 1 TonenGeneral Sekiyu K.K
Multemp PS1 KYODOH YUSHI CO., LTD.