OM-1271-003_w.pdf - 第33页

30 Tg1097-ID-OP 0708-002 [5] [Noz exchange] Button When this button is pressed, the "Noz Exchange" window appears. Reference Refer to Chapter 4, 4.2 "Nozzle Change" W indow in the main machine instruc…

Tg1097-ID-OP

0708-003

[1] Select Head Button

The button images showing the head positions are displayed.

Using these buttons, the PEC recognition camera used for the teaching

is selected.

[2] "Head Nozzle Inclination Offset" Display

When the button showing the head of which data is to be displayed, is

pressed, the head data is displayed.

NL Inclination

The offset data values for X (horizontal) (mm) and Y (vertical)

(mm) for each nozzle for multi-functional heads, are displayed.

HL Inclination and DD Inclination

The offset data values for X (horizontal) (mm) and Y (vertical)

(mm) for multi-functional heads are displayed.

Optical Axis Inclination

The offset data for each nozzle for the multi-functional heads, is

displayed.

Cmt

: Offset values before teaching

Adj

: Offset values obtained as the result of teaching

[3] Designate Nozzle

[All Nozzle] Button (Disable)

Using this button, all nozzles are taught.

[Designate Nozzle] Button

Using this button, the nozzle, for which the teaching is

performed, is designated.

When the [Designate Nozzle] button is pressed, the [Nozzle No.]

button is enabled.

[Nozzle No.] Button

Using this button, the nozzle for which the teaching is performed

is designated.

When the [Nozzle No.] button is pressed, the "Nozzle No."

selection window appears.

[4] [Teach Start] Button

Using this button, the teaching is performed.

8.4 Head Nozzle Inclination Offset

Tg1097-ID-OP

0708-002

[5] [Noz exchange] Button

When this button is pressed, the "Noz Exchange" window appears.

Reference

Refer to Chapter 4, 4.2 "Nozzle Change" Window in the main

machine instruction manual, for the details of the Nozzle Exchange

Window.

•

Teaching Jig

For the teaching of the head nozzle inclination offsets, the QFP Glass Plate

Jig JG-0188 is used.

•

Jig Pick-up Nozzle

For picking up the QFP Glass Plate Jig, the jig nozzle (standard accessory) or

usual vacuum nozzle FA06 is used.

•

Teaching Procedure

Procedure

(1) Before the teaching, change the nozzle to the jig nozzle and

place the QFP Glass Plate Jig on the jig storage space on the

component recognition camera.

Place the QFP Glass Plate Jig with its printed surface turned

down.

(2) Select the head (1 or 2) and nozzle for which the Head Nozzle

Inclination Teaching is performed.

(3) Press the [Teach Start] button.

The head nozzle inclination offset teaching will be performed.

•

When the teaching is performed, the start-up conditions are

checked.

•

If any recognition error occurs in the course of the teaching,

or the [STOP] button is pressed on the operation panel, the

operation is paused. From this condition, re-start is available.

•

In the pause condition, any other menu can not be selected.

When the teaching is completed, the designated head is returned

to the origin automatically. The teaching results are displayed in

the "Head Nozzle Inclination Offset" display section.

(4) Repeat the Step (1) through (3) and teach the necessary nozzles.

(5) When the teaching is completed, remove the QFP Glass Plate Jig.

8.4 Head Nozzle Inclination Offset

Tg1097-ID-OP

0708-002

9. Periodic Maintenance

9.1 Precautionary Items before Maintenance

This session describes how to perform inspections, cleaning, lubrication, and

adjustment to keep the machine in good shape.

It is recommended that periodic maintenance of the machine should be

ensured.

WARNING

• Only qualiﬁed personnel should perform the maintenance

work carefully for the machine in compliance with the

speciﬁed instructions.

WARNING

• Before performing any maintenance work, be sure to lock

the power breaker and the air source with padlocks.

Power Breaker : Set the power breaker to the "OFF" side

and lock it with a padlock.

Air Source : Stop the air supply and set the main

valve to the "EXH." side. After that, be

sure to lock it with a padlock.

• Designate a person who can have charge of the padlock

key.

• If the provided padlock is lost or damaged, purchase its

substitute.