OM-1271-003_w.pdf - 第36页

33 Tg1097-ID-OP 0708-002 9.2 Preparation for Maintenance 9.2.2 Preparation for Lubrication Prepare for the specified types of grease and lubrication tools. Specified Greases • DAPHNE EPONEX GREASE No. 1 (IDEMITSU KOSAN) No…

100%1 / 85
32
Tg1097-ID-OP
0708-002
9.2 Preparation for Maintenance
9.2 Preparation for Maintenance
9.2.1 Preparation for Cleaning
Prepare the following items.
• Rag
Use a rag made of such material as cotton, etc., that produces as less waste
thread as possible.
Notice
If any fiber is left, it might cause the system breakdown.
• Oiled Rag
Use a rag made of such material as cotton, etc., that produces as less waste
thread as possible.
Too much grease should not be applied and any different type of grease
should not be mixed into the specified one.
Notice
If any fiber is left, it might cause the system breakdown.
• Air Gun
Do not use the air gun for any spots than the specified ones.
If dirt and dust are dispersed, they may adhere to the sensors and moving
mechanisms, causing the machine to break down.
Fig. 8
33
Tg1097-ID-OP
0708-002
9.2 Preparation for Maintenance
9.2.2 Preparation for Lubrication
Prepare for the specified types of grease and lubrication tools.
Specified Greases
•
DAPHNE EPONEX GREASE No. 1 (IDEMITSU KOSAN)
Note
Before lubrication, wipe off old grease. Otherwise, the effect of grease and
oil will decrease.
Same Types of Lubricants
•
Grease Types equivalent to DAPHNE EPONEX GREASE No. 1
(IDEMITSU KOSAN)
Table 2
Grease Names Makers
Alvania Grease No. 1 Showa Shell Sekiyu K.K
Multinoc Grease No. 1 NIPPON OIL CORPORATION
Jomo Lisonix Grease No. 1 JAPAN ENERGY CORPORATION
Dynamax No. 1 COSMO OIL LUBRICANTS CO., LTD.
Lithtan No. 1 ESSO OIL
MP Grease No. 1
KYGNUS
Gemico MP No. 1 TonenGeneral Sekiyu K.K
Multemp PS1 KYODOH YUSHI CO., LTD.
34
Tg1097-ID-OP
0708-002
9.2 Preparation for Maintenance
Specified lubrication tools
(1) Brush
Use a brush whose bristles do not come off if possible.
(2) Vinyl Gloves
Use a pair of vinyl gloves to apply grease and oil by hand.
(3) Syringe
Standard : 10 ml SS-10-LZ
Part No. : 630 133 3793
Maker : TERUMO CORPORATION
Appearance
1
2
3
4
5
6
7
8
9
10
12
mL
SINGLE USE ONLY
TERUMO
Fig. 9
Table 3
Standard Shape Part No. Remarks
Syringe 630 133 3793
Maker
: TERUMO CORPORATION
10 ml SS-10-LZ
No.19
(Color : Brown)
630 062 2621
Maker
: Nipro
Inside Diameter
: φ0.79
Length
: 65 mm Flattened End