P-TOOL说明书.pdf - 第161页

3-41 3 Board Editor 3. Graphic View The graphic view graphically displays component placement layout and fiducial mark positions in the main view as well as component and mark outlines. 3.1 Displaying/closing the graphic…

100%1 / 228
3-40
3
Board Editor
n
Renumber of selection line
WhenyouexecuteRenumberasfollowsfortheselectionline,Renumberisexecutedintheselectionline.
Renumber of selection line
64369-S0-00
n
Restriction matter
•
This function has been limited to the Mount Data.
•
Itdoesn'tcorrespondtoREDOandUNDO.
3-41
3
Board Editor
3. Graphic View
The graphic view graphically displays component placement layout and fiducial mark positions in the main
view as well as component and mark outlines.
3.1 Displaying/closing the graphic view
●
Displaying the graphic view
To display the graphic view when not displayed, click the Graphic View icon in the tree view.
Reference
Selecting "Graphic View" from the View menu or clicking the [Show Graphic View] button on the toolbar also displays
the graphic view.
Graphic view
64348-S0-00
●
Closing the graphic view
To close the graphic view when being displayed, click an icon other than the Graphic View icon in the tree view.
Reference
Selecting "Graphic View" from the View menu or clicking the [Show Graphic View] button on the toolbar also closes
the graphic view.
3-42
3
Board Editor
3.2 Manipulating the graphic view
The graphic view consists of a graphic window and a toolbar.
Graphic view screen
Graphic toolbar
Board graphic window
64349-S0-00
●
Graphic toolbar
1 2 3 54
6 7 8 9 10 11 12 13
14 15 16 17 18 19
Graphic toolbar
64350-S0-10
1.
All offset
Setsuptheoffsetvaluefortheentiregraphicviewindication.(Referto3.4Graphicviewindicationoffsetsetting)
Select a board securing method and enter the origin position of board in the respective fields. Click the [OK] button to
close the window and the values will be applied to the graphic view.
Reference
The origin position of board is usually shown at the position of X=5mm, Y=5mm on the graphic view.
Indication offset
64351-S0-00