P-TOOL说明书.pdf - 第61页
2-27 2 Board Explorer n Use original block number (YGX only) This method can be selected only when customization of YGX expansion storage data output is effective and data type of the source board data is YGX. In this ca…
2-26
2
Board Explorer
n
Use offset information
With this setting, offset information is used for division board block number. As many stored data as the number of offset
information are opened. Select this method to convert board data with only one block or without block distribution. If
this method is selected for board data already opened with block distribution, division board block number of Inspection
program will be all one.
Use offset information
642A9-S0-00
n
Use reference data
Withthissetting,referencedataisusedforMulti-blockPCBblocknumber.Usethissettingtoconvertboarddataalready
opened with block distribution.
Use reference data
642B1-S0-00
Error will be indicated when there is no reference data or there is inconsistency with reference data.
Error dialog box
642B2-S0-00
2-27
2
Board Explorer
n
Use original block number (YGX only)
This method can be selected only when customization of YGX expansion storage data output is effective and data type of
the source board data is YGX. In this case, it is impossible to select “Use reference data”. Select this method when
customization of YGX expansion storage data output is effective and when converting YGX type board data opened with
block distribution.
Use original block number
642B3-S0-00
7
Conversion will be executed.
A conversion error dialog box will be indicated when an error occurs during conversion.
Conversion error dialog box
642B5-S0-00
2-28
2
Board Explorer
8
When conversion is completed, conversion completion message will be indicated
and the converted Inspection program will be stored in the destination folder.
Conversion completion message
642B7-S0-00
Converted inspector data
642B8-S0-00