P-TOOL说明书.pdf - 第170页

3-50 3 Board Editor n Examples of changing Offset value Thefollowingfigureisagraphicviewthatmakestheoffsetvalue(5mm,5mm). The larger part is located at the center of board and parts are located at the origi…

100%1 / 228
3-49
3
Board Editor
n
Board Graphic View Offset dialog
You can change Offset Value from Board Graphic View Offset dialog
Board Graphic View Offset dialog
64374-S0-00
When the dialog is closed by pushing the [OK] button after changing, the offset value after it changing is
reflected in a Graphic View.
There are two kinds of offset values (based the Edge Clamp and the Locate Pin) displayed here.
It is different which to be used according to each machine uses the method of fixing which substrate.
Board Fix Device
64375-S0-00
However,when“LocatePin”settingonthe“MachineProperty”is“None”(itis“MachineInformation”-
“InstallationSetting”),theOffsetValue-“EdgeClamp”isusedalways.
“Machine Information” - “Locate Pin” Exist / None
64376-S0-00
3-50
3
Board Editor
n
Examples of changing Offset value
Thefollowingfigureisagraphicviewthatmakestheoffsetvalue(5mm,5mm).
The larger part is located at the center of board and parts are located at the origin position.
Offset (5mm, 5mm)
64377-S0-10
Itisshowntobearrangedatthepositionof(5mm,5mm)whileselectingpartsatthestartingpointposition
when seen from the substrate coordinates.
Thefollowingfigureisagraphicviewthatmakestheoffsetvalue(0mm,0mm).
The coordinates are different though parts are arranged at the center of the substrate similarly.
Offset (0mm, 0mm)
64378-S0-10
Moreover,partsatthestartingpointpositionarearrangedin(0,0)onthesubstrate.
3-51
3
Board Editor
4. Multi Lane Support
Additional features supporting the dual lane machine are listed below.
4.1 Board data select dialog is extended
[Lane 1 Board Name] [Lane 1 Board Comment] [Lane 2 Board Name] [Lane 2 Board Comment] are added. On
the line without dual lane machine, the former dialog is displayed.
Board data select dialog
64380-S0-00
4.2 The tree view is extended
Reading YGX(Combined) board data, [Lane 1 Board][Lane 2 Board] are displayed on board data and graphic
view. When it is selected, the information for each lane is displayed.
Tree view
64381-S0-00