P-TOOL说明书.pdf - 第217页

4-42 4 Feeder Viewer 4.2.2 Settings n Set number of Dump Station Y ou can change this Setting only in the machines. When you change this setting, make system bac kup disk and Re-register in Y .F acT . 1. Launch “Setting”…

100%1 / 228
4-41
4
Feeder Viewer
n
Optimizer
Optimizer arranges Dump Station and components that use it according to the setting above.
•ComponentsthatuseDumpStationarearrangedtothemachines(ortables)thathaveDumpStation.
•Optimizerdoesn’tarrangeFeederstothespaceoccupiedwithDumpStation.
n
Display of Dump Station in Feeder Viewer
In Feeder Viewer, Dump Stations are displayed as follows according to the state.
“Not Use” Only the line.
“Use” Green
“Auto” Thin green
Display of Dump Station in Feeder Viewer
88Xg
Total Mount Point : 0
Un-assigning Parts : 0
20 21 30 37107
64463-S0-00
[Description on indication contents]
“Use”:Showsingreen
“NotUse”:Nocolor(Lineonly)
“Auto”:Showsinlightgreen
4-42
4
Feeder Viewer
4.2.2 Settings
n
Set number of Dump Station
You can change this Setting only in the machines. When you change this setting, make system backup disk and
Re-register in Y.FacT.
1. Launch “Setting”.
2. Select “Setting”-“Machine Data”-“Mechanical”-“Position”.
3. Make sure that “Set No.” in “Dump Station 1–4 ” is correct.
n
Feeder Plate Specification
You can change this Setting only in the machines. When you change this setting, make system backup disk and
Re-register in Y.FacT.
1. Launch “Setting”.
2. Select “Setting”- “Specification Information”-“Plate Specification”.
3. Change the setting so that feeders are arranged to the space to which they were not arranged in the past function.
Refer to the following example.
Before
* Dump Station is arranged in Set No. 1-6.
64464-S0-00
After
64465-S0-00
4-43
4
Feeder Viewer
n
Dump Station Specification
Set Width information of each Dump Station as follows.
This is Setting in Y.FacT.
1. Launch “Machine Property”.
2. Select “Setting”- “Specification Information”-“Dump Station Specification”.
Dump Station Specification
64466-S0-00
3. Input width of a right and left occupation of Dump Station (by the unit of Millimeter).
Please set as follows according to the kind of the Dump Station.
Type Left (mm) Right (mm)
Motor drive conveyo 40.00 40.00
Air cylinder drive conveyor 75.00 50.00