P-TOOL说明书.pdf - 第59页

2-25 2 Board Explorer 5 Select the board data to be conv erted and click the [C onvert] button. (Multiple data can be selected) [Con ver t] button 642A7-S0-00 Click the [Select All] button w hen you want to select al l t…

100%1 / 228
2-24
2
Board Explorer
4
The board data conversion display will be shown.
Board data of a solder paste printer cannot be converted and it will not be shown in the list.
Board data conversion display
642A4-S0-00
Double-click the Save Board Name or click the [Change Save Name] button when you want to rename
the board data after conversion. The Board Name can contain up to 20 characters.
Dialog box for renaming the board data
642A5-S0-00
Double-click the destination folder or click the [Change Save Place] button when you want to change
the destination folder.
Screen for changing the destination folder
642A6-S0-00
2-25
2
Board Explorer
5
Select the board data to be converted and click the [Convert] button. (Multiple
data can be selected)
[Convert] button
642A7-S0-00
Click the [Select All] button when you want to select all the boards in the list.
Click the [Deselect] button when you want to cancel the selection of all the boards in the list.
6
Screen for selecting setting method of division board block number will appear.
Select the setting method of division board block number and click the OK button.
Screen for selecting setting method of division board block number
642A8-S0-00
This screen is indicated for each board.
When you click the [All Yes] button, subsequent board data will be converted in the same setting. No
message will be indicated as long as the data format of the subsequent boards is the same. The
message will be indicated again on different data type such as VIOS or YGX.
2-26
2
Board Explorer
n
Use offset information
With this setting, offset information is used for division board block number. As many stored data as the number of offset
information are opened. Select this method to convert board data with only one block or without block distribution. If
this method is selected for board data already opened with block distribution, division board block number of Inspection
program will be all one.
Use offset information
642A9-S0-00
n
Use reference data
Withthissetting,referencedataisusedforMulti-blockPCBblocknumber.Usethissettingtoconvertboarddataalready
opened with block distribution.
Use reference data
642B1-S0-00
Error will be indicated when there is no reference data or there is inconsistency with reference data.
Error dialog box
642B2-S0-00