YS12P_YS12F_YG12F_Mainte_E.pdf - 第6页

iv Safety instructions 1.8 Keeping hands away from moving par ts Duringuseofthismachine,thecustomer’sequipmentandoperatingconditionsmightallowtheoperator’s handstocomeintocontactwithmovingparts. Use…

100%1 / 101
iii
Safety instructions
1.3 Restrictions on machine use
1.3.1 Defining the operator and service personnel
c


Operator:
Theoperatorissomeonewhohasbeentrainedbyusinmachineoperation,hasathoroughknowledgeofthemachine
operationmanualanddemonstratesadequateknowledgeofmachineoperationandsafety.
Maintasksoftheoperatorincludepre-operationchecks,operation(componentmounting)andmakingsetups
(changeovers).Themachineisonlyusedinnormaloperatingmode.
Service personnel:
Theservicepersonnelarethosetrainedbyusinmachinemaintenanceaswellassafetyinstructionanddemonstratea
thoroughknowledgeofsafehandlingofthemachineaccordingtothetypeandlocationofmachineoperation.Theymust
alsounderstandhazardoussectionsofthemachineandresidualrisks.
Maintasksoftheservicepersonnelincludemachinemaintenance,repair,adjustmentandmanagementofthesystem.
Theservicepersonnelmaymakechangestothemachinesettingsandoperationinfactoryadjustmentmode.
1.3.2 Restricting machine operation with passwords
Machineoperatinglevelsusablebytheoperatorandservicepersonnel(mentionedabove)mustberestricted
bypassword.Thispreventstheoperatorandservicepersonnelfromusingthemachineatahigherlevelthan
allowed.
1.4 Cautions during machine operation
• Always make pre-operation checks before turning on the main power switch.
• Do not use an air blow gun when cleaning the machine. (Airborne dust will badly affect machine operation.)
• Stop all machine operation before cleaning around the machine.
• Do not turn off the compressed air during operation.
• Always make periodic inspections to prevent unexpected machine breakdowns.
• Allow only properly trained, experienced workers to perform repair and adjustment.
1.5 Cautions during power outages
Ifapoweroutage(blackout)occursduringautomaticmachineoperation,alwaysturnthemainpowerswitch
offtopreventfaultyoperationandequipmentdamageafterpowerhasbeenrestored.Removeitemssuchas
boardsthatremaininsidethemachine.
1.6 Cautions regarding ferromagnetic fields
SomeYS/YG-seriesmachinescontainpartsgeneratingstrongmagneticfieldswhichmaycausebodilyinjury,
death,ordevicemalfunction.Alwayscomplywiththefollowinginstructions.
• Persons wearing electronic medical devices such as hearing aids and/or cardiac pacemakers must keep away
from the linear motor.
• Persons wearing ID cards, purses, and/or wristwatches must keep away from the linear motor.
• Do not attempt to disassemble the linear motor (including surrounding covers).
• Do not bring tools close to the linear motor.
• Do not bring tools close to the magnetic scale.
• Do not put magnetic materials or objects close to the linear motor.
• Do not touch a portion close to the linear motor during operation or immediately after the operation has been
finished since such part is hot.
1.7 Handling the internal tape cutter (YS series machines)
•Neversupplyelectricalpowerandcompressedairtothemachinewhilethecoversforthetapecutterareremoved.
•TapecuttermaintenancetasksmustbeperformedbyYAMAHAservicepersonnel.
iv
Safety instructions
1.8 Keeping hands away from moving parts
Duringuseofthismachine,thecustomer’sequipmentandoperatingconditionsmightallowtheoperator’s
handstocomeintocontactwithmovingparts.
Usethefollowingsafetymeasureoptionstoavoidpossibledangerwhereopeningsorgapsarefoundonthe
machine.
n
Dummy feeder, One-stop cover (YS series machines)
Useadummyfeederasasafetymeasuretofillagapbetweentapefeeders.Installadummyfeederonthefeederbank
thesamewayasnormalSSfeedersinordertopreventhandsfromentering.
Prevention of hand entry
Dummy feeder, One-stop cover
Dummy feeder (Wide-size)
Dummy feeder (8mm-size)
One-stop cover (For feeder exchange carriage)
91203-L0-10
n
Dummy feeder (YG series machines)
Useadummyfeederasasafetymeasuretofillagapbetweentapefeeders.Installadummyfeederonthefeederplate
thesamewayasnormalfeedersinordertopreventhandsfromentering.
Dummy feeder
8mm
91203-M7-00
v
Safety instructions
n
Muzzle plate
Usetheseplatesasasafetymeasurefortheboardconveyorentranceandexitopenings.Eachplateismovable,soadjust
themountingpositiontomatchtheboardstobeproduced.
Muzzle plate
Upper muzzle plate
Lower muzzle plate
Board conveyance plane
91205-L0-00
Upper clearance Lower clearance Remarks
YS100/YS88 8.0 to 38.5mm 1.0 to 31.0mm From board conveyor plane
YS12, YS12P, YS12F, YS24
(YG12, YG12F)
5.0 to 20.0mm 4.2 to 39.2mm From board conveyor plane
YSP 0 to 6.6mm 0 to 26.4mm From board conveyor plane