KY8030 Programmers Manual.pdf - 第42页
40 | KY-8030 Series (KYOS-2007001_rev0) 3D In ‐ line Solder Paste Inspection Systems (Before "Non base Off") (After "Nonbase Off") (Before "Inside Off" ) (After "Inside Off&…
Programmers Manual
| 39
In case of “Flash + Trace”
a) Select the flash and trace together.
b) Click then select “Trace Off”.
Or right click. Select “Edge-Trace”. Select “Trace Off”.
c) Trace is created instead of “Flash + Trace”
d) Select the trace and convert it to the pad.
(Before "Trace Off")
(After "Trace Off")
40 | KY-8030 Series(KYOS-2007001_rev0)
3DIn‐lineSolderPasteInspectionSystems
(Before "Nonbase Off")
(After "Nonbase Off")
(Before "Inside Off")
(After "Inside Off")
Programmers Manual
| 41
10) Nonbase All Off
Create an edge-trace for all flashes and traces in a nonbase layer within a work
area.
Ú Caution: Once a change is made to a flash or trace, it cannot be reversed.
(Before "Nonbase All Off")
(After "Nonbase All Off")