KY8030 Programmers Manual.pdf - 第91页
Programmers Manual | 89 2.3.2. T ools Menu 1) PCB Info In the “PCB Setting” dialog box, change PCB information and click the Apply button. The “PCB Setting” Dialog Box PCB Name The name of the PCB Length The length of …
88 | KY-8030 Series(KYOS-2007001_rev0)
3DIn‐lineSolderPasteInspectionSystems
7) Export Report
Save the contents of a job file in csv format (*.csv).
The “Select Job File” Dialog Box
8) Recent files
Open the most recent job file. Up to 10 of the most recent job files are saved for later
use.
9) Quit
Quit the CEditor program.
The “Select Job File” Dialog Box
Click the Yes button to quit the program.
带格式的:
项
目符
号
和
编号
带格式的:
项
目符
号
和
编号
带格式的:
项
目符
号
和
编号
Programmers Manual
| 89
2.3.2. Tools Menu
1) PCB Info
In the “PCB Setting” dialog box, change PCB information and click the Apply button.
The “PCB Setting” Dialog Box
PCB Name
The name of the PCB
Length
The length of the PCB
Width
The width of the PCB
Mask Thickness
The mask thickness
Comment
Comments for PCB settings
No of Array
The number of arrays used
in the PCB
2) Component Size Rotation
Swap the values of the width and length for a component.(When using CAD file)
3) CAD Rotation 90 Degree
Rotate CAD screen by +90°.
4) CAD Rotation -90 Degree
Rotate CAD screen by -90°.
5) CAD Mirror X
Move the CAD screen symmetrically along the X-axis
6) CAD Mirror Y
Move the CAD screen symmetrically along the Y-axis
90 | KY-8030 Series(KYOS-2007001_rev0)
3DIn‐lineSolderPasteInspectionSystems
7) ADD PAD
In the “ADD PAD” dialog box, enter pad information and click the OK button. A new
pad will be created.
The “ADD PAD” Dialog Box
Pad ID
Pad ID.
Note: Upon pad creation, a pad ID is
automatically assigned and cannot
be changed.
Shape
The shape of the pad
PositionX
The X-coordinate of the pad
PositionY
The Y-coordinate of the pad.
Width
The width of the pad
Length
The length of the pad
Area(%)
The actual area of the pad.
Note: Click the CAL.button to calculate the
actual area of the pad shape.
Angle
The angle of the pad
※ Note: The available pad shapes are as follows:
R - Rectangle
C - Circle
D - Rounded Rectangle
O - Oblong
U - Undefined
P-Sloped Rectangle (pad sloped forward at 45°),
N-Sloped Rectangle (pad sloped backward at 45°),