4OM-1322-006_w.pdf - 第111页
1-49 AKOEMT -ID 1004-003 4.3 Replacement of Cleaning Paper (How to change the cleaning paper width) (12) Push down the lev er while holding the ta ke-up roller such that the cutout of the left adapter can fit into the pin…
1-48 AKOEMT-ID
(10) Push down the lever while holding the supply roller (new paper side)
such that the cutout of the left adapter can fit into the pin on the left
flange of the cleaning unit and attach the supply roller in place.
Lever being pushed down
Fig. 4A69
Note
Because the right adapter will be disengaged easily from the roll core and
fall down, attach the supply roller, keeping it right side up.
(11) Thread the cleaning paper in the order of "*1" to "*4".
Paper End
*1
*4
*3
*2
Front View of Cleaning Section Top View of Cleaning Section
Fig. 4A70
Note
Note the rolling direction of the paper.
0609-002
4.3 Replacement of Cleaning Paper (How to change the cleaning paper width)
1-49
AKOEMT-ID
1004-003
4.3 Replacement of Cleaning Paper (How to change the cleaning paper width)
(12) Push down the lever while holding the take-up roller such that the cutout
of the left adapter can fit into the pin on the left flange of the cleaning
unit and attach the take-up roller in place.
Lever being pushed down
Fig. 4A71
Note
Because the right adapter will be disengaged easily from the roll core and
fall down, attach the supply roller, keeping it right side up.
(13) Attach the paper end securely to the roll core on the take-up side, using
a gummed cloth tape.
Roll Core Shaft
Gummed Cloth Tape, etc.
Paper Side End
Fig. 4A72
Note
Secure the paper end so that the paper side end is arranged at right angles
to the roll core shaft to take the paper up evenly on the left and right.
1-50 AKOEMT-ID
(14) Push up the lever on the take-up roller side until the roller is kept free.
(15) Rotate the take-up roller by hand and wrap the paper 2 or 3 turns
around the take-up roller.
Fig. 4A73
0609-002
4.3 Replacement of Cleaning Paper (How to change the cleaning paper width)