4OM-1322-006_w.pdf - 第24页

Safe-1 1 AKOE-ID Safety Precautions Alert Indications described as " " (continued) Alert Description Related Items The internal cap may pop out, dispersing industrial alcohol and causing a personal injury (loss…

100%1 / 211
Safety Precautions
Safe-10
AKOE-ID
0704-003
Alert Indications described as " WARNING "
Alert Description Related Items
Be sure to keep the all doors closed to avoid any danger when
the automatic operation is started or during the automatic
operation.
"2.2.2" in
"Ch
apter 1 (Vol. 1)"
Before performing maintenance work, etc., shut off the power
breaker and lock the power breaker with the padlock.
"2.3.1" in
"Ch
apter 1 (Vol. 1)"
•
Only qualified personnel should perform the maintenance
work carefully for the machine in compliance with the specifi
ed
instructions.
"1.1" in
"Ch
apter 1 (Vol. 4)"
•
It is highly dangerous for either the power or air supplies to be
turned on by other people during maintenance.
Before performing any maintenance work, be sure to lock the
power breaker and the air source with padlocks.
Power Breaker : Set the power breaker to the "OFF" side and
lock it with a padlock.
Air Source
: Stop the air supply and set the main valve to
the "SHUT" side. After that, be sure to lock it
with a padlock.
•
Designate a person who can have charge of the padlock keys.
•
If the provided padlock is lost or damaged, purchase its
substitute.
"1.1" in
"Chapter 1 (Vol. 4)"
As industrial alcohol is flammable, be sure to keep it away from
any possible sources of fire as it is likely to ignite and start a fire.
•
Keep industrial alcohol away from any heat of fire.
•
Avoid smoking and using fire when near the device.
"2.1" in
"Ch
apter 1 (Vol. 4)"
WARNING
Safe-11
AKOE-ID
Safety Precautions
Alert Indications described as " " (continued)
Alert Description Related Items
The internal cap may pop out, dispersing industrial alcohol and
causing a personal injury (loss of eyesight, etc.).
•
Never remove the cap of the solvent tank while the machine is
running.
When the cap is loose, the internal lid may blow off, causing the
industrial alcohol to drip out. The spill may also cause a fi
re.
•
Tighten the cap of the tank securely
.
•
If you have spilt solvent by mistake, clean it up with a rag as
soon as possible.
•
After cleaning up the spilt solvent, confirm that it has dried
completely and enough ventilation is provided. After that, turn
on the power switch of the machine.
Industrial alcohol can cause poisoning, skin inflammation, or
degreasing.
•
Try to wear goggles, protective gloves, a protective mask, etc.,
to protect against spills on exposed skin.
"4.4" in
"Ch
apter 1 (Vol. 4)"
To avoid solvent spills, be sure to use the replenishment
container equipped with a nozzle.
•
If you have spilt solvent by mistake, clean it up with a rag as
soon as possible.
•
After cleaning up the spilt solvent, confirm that it has dried
completely and enough ventilation is provided. After that, turn
on the power switch of the machine.
"4.4" in
"Ch
apter 1 (Vol. 4)"
When the cap is loose, the internal lid may blow off, causing the
industrial alcohol to drip out. The spill may also cause a fire.
Tighten the cap of the tank securely.
"4.4" in
"Ch
apter 1 (Vol. 4)"
0704-002
WARNING
Safety Precautions
Safe-12
AKOE-ID
Alert Indications described as " CAUTION "
Alert Description Related Items
Be careful to avoid hand and finger injuries when closing the
doors.
•
Hold the handgrip firmly and open or close the door slowly
.
•
Do not put your hand on the machine while closing the cover.
"2.2.2" in
"
Ch
apter 1 (Vol. 1)"
When the green lamp of the light tower is ON or flickering (ON and
OFF), it indicates that the static machine is in the "Automatic" mode
(standby mode).
Do not touch any moving areas of the machine.
"2.3.2" in
"
Ch
apter 1 (Vol. 1)"
•
When the [OPERATION/SET UP] switch is set to the "SET
UP"
side, the interlock function of the door is deactivated.
•
Do not operate the machine with the [OPERA
TION/SET UP]
switch in the "SET UP" mode except for the setup operations.
•
Do not keep the selection key inserted unless necessary
. The
key shall be stored by the person in charge.
"2.3.3" in
"Ch
apter 1 (Vol. 1)"
Before starting the automatic operation, check carefully that
there is no person around the machine (especially on the other
side of the machine operation). Make sure that no objects (tools,
parts, etc.) are left behind.
"1.3" and "2.1" in
"Ch
apter 3 (Vol. 1)"
The padlock key should be kept in such a way that nobody except the
personnel in charge of maintenance can supervise it.
"1.7.2" in
"C
h
apter 3 (Vol. 1)"
•
Even when the power breaker is set to "OFF", the primary line
is powered, making it possible to cause an electric shock.
Be sure to completely stop the power supply to the machine before
maintenance work.
"1.1" in
"Ch
apter 1 (Vol. 4)"
•
Residual voltages may remain behind for a few minutes in the
internal devices of the machine after power interception.
Before performing maintenance work, wait until the charge lamps of
the DC power supply and the servoamplifier go "OFF" in 10 minutes
or more after the power breaker is set to "OFF".
"1.1" in
"
Chapter 1 (Vol. 4)"
0704-003
CAUTION