4OM-1322-006_w.pdf - 第25页

Safety Precautions Safe-12 AKOE-ID Alert Indications described as " CAUTION " Alert Description Related Items Be careful to avoid hand and finger injuries when closing the doors. • Hold the handgrip firmly and op…

100%1 / 211
Safe-11
AKOE-ID
Safety Precautions
Alert Indications described as " " (continued)
Alert Description Related Items
The internal cap may pop out, dispersing industrial alcohol and
causing a personal injury (loss of eyesight, etc.).
•
Never remove the cap of the solvent tank while the machine is
running.
When the cap is loose, the internal lid may blow off, causing the
industrial alcohol to drip out. The spill may also cause a fi
re.
•
Tighten the cap of the tank securely
.
•
If you have spilt solvent by mistake, clean it up with a rag as
soon as possible.
•
After cleaning up the spilt solvent, confirm that it has dried
completely and enough ventilation is provided. After that, turn
on the power switch of the machine.
Industrial alcohol can cause poisoning, skin inflammation, or
degreasing.
•
Try to wear goggles, protective gloves, a protective mask, etc.,
to protect against spills on exposed skin.
"4.4" in
"Ch
apter 1 (Vol. 4)"
To avoid solvent spills, be sure to use the replenishment
container equipped with a nozzle.
•
If you have spilt solvent by mistake, clean it up with a rag as
soon as possible.
•
After cleaning up the spilt solvent, confirm that it has dried
completely and enough ventilation is provided. After that, turn
on the power switch of the machine.
"4.4" in
"Ch
apter 1 (Vol. 4)"
When the cap is loose, the internal lid may blow off, causing the
industrial alcohol to drip out. The spill may also cause a fire.
Tighten the cap of the tank securely.
"4.4" in
"Ch
apter 1 (Vol. 4)"
0704-002
WARNING
Safety Precautions
Safe-12
AKOE-ID
Alert Indications described as " CAUTION "
Alert Description Related Items
Be careful to avoid hand and finger injuries when closing the
doors.
•
Hold the handgrip firmly and open or close the door slowly
.
•
Do not put your hand on the machine while closing the cover.
"2.2.2" in
"
Ch
apter 1 (Vol. 1)"
When the green lamp of the light tower is ON or flickering (ON and
OFF), it indicates that the static machine is in the "Automatic" mode
(standby mode).
Do not touch any moving areas of the machine.
"2.3.2" in
"
Ch
apter 1 (Vol. 1)"
•
When the [OPERATION/SET UP] switch is set to the "SET
UP"
side, the interlock function of the door is deactivated.
•
Do not operate the machine with the [OPERA
TION/SET UP]
switch in the "SET UP" mode except for the setup operations.
•
Do not keep the selection key inserted unless necessary
. The
key shall be stored by the person in charge.
"2.3.3" in
"Ch
apter 1 (Vol. 1)"
Before starting the automatic operation, check carefully that
there is no person around the machine (especially on the other
side of the machine operation). Make sure that no objects (tools,
parts, etc.) are left behind.
"1.3" and "2.1" in
"Ch
apter 3 (Vol. 1)"
The padlock key should be kept in such a way that nobody except the
personnel in charge of maintenance can supervise it.
"1.7.2" in
"C
h
apter 3 (Vol. 1)"
•
Even when the power breaker is set to "OFF", the primary line
is powered, making it possible to cause an electric shock.
Be sure to completely stop the power supply to the machine before
maintenance work.
"1.1" in
"Ch
apter 1 (Vol. 4)"
•
Residual voltages may remain behind for a few minutes in the
internal devices of the machine after power interception.
Before performing maintenance work, wait until the charge lamps of
the DC power supply and the servoamplifier go "OFF" in 10 minutes
or more after the power breaker is set to "OFF".
"1.1" in
"
Chapter 1 (Vol. 4)"
0704-003
CAUTION
Safe-13
AKOE-ID
Safety Precautions
Alert Indications described as " " (continuted)
Alert Description Related Items
Industrial alcohol is a highly toxic substance.
•
When you use industrial alcohol (solvent), be sure to wear protective
equipment (gloves and apron, etc.) to protect against spills on
exposed skin.
•
Whenever solder paste has adhered to your skin, immediately remove
it with lukewarm water mixed with a cleaning detergent.
"2.1" in
"
Ch
apter 1 (Vol. 4)"
Set the [OPERATION/SET UP] switch to the "SET UP" side
before work.
Only the person in charge of maintenance should perform this
work.
"4.3" and "4.6" in
"Chapter 1
(Vol. 4)"
Be sure to turn off the power supply to the machine before work.
Only the person in char
ge of maintenance work should perform this
operation.
"4.4" in
"
Ch
apter 1 (Vol. 4)"
Industrial alcohol is likely to ignite if spilt within the machine.
•
Do not put the industrial alcohol on the machine. Otherwise, you may
spill the alcohol by mistake, causing it to flow into the inside of the
machine.
•
Do not put the industrial alcohol nor the replenishment container
inside the machine.
•
Be sure not to perform replenishment work (supplying the
replenishment container with industrial alcohol) in the machine.
•
Do not spill industrial alcohol outside the solvent tank during the
replenishment work.
•
If you have spilt solvent by mistake, clean it up with a rag as soon as
possible.
•
After cleaning up the spilt solvent, confirm that it has dried
completely and enough ventilation is provided. After that, turn on the
power switch of the machine.
•
The pressure of the air supplied to the solvent tank is set to 0.015
MPa (0.15 kgf/cm
2
).
If more than the specified pressure is applied, the tank may explode.
Be sure not to change the set pressure.
"4.4" in
"Ch
apter 1 (Vol. 4)"
0704-003
CAUTION