4OM-1322-006_w.pdf - 第150页
2-13 AKOEMT -ID 2.2.1 T ypical Description T able 4B4 Error ID Error Name, Description, Cause, and Remedy 0101000 T able-X Origin Zeroing opn. was incompleted, within specified time. (Cause 1) Dirt adheres to the sensor a…
2-12 AKOEMT-ID
2.2 Troubleshooting after Error Display
Assuming "ID/ITEM/CONTENT" in the "ERROR" window as an index, the
system retrieves the related page of the instruction manual.
Refer to "2.2.1 Typical Description" for the detailed description.
Fig. 4B9 Example of "ERROR" Window
0603-001
2.2 Troubleshooting after Error Display
2-13 AKOEMT-ID
2.2.1 Typical Description
Table 4B4
Error ID Error Name, Description, Cause, and Remedy
0101000 Table-X Origin
Zeroing opn. was incompleted, within specified time.
(Cause 1)
Dirt adheres to the sensor and the optical beam is shielded.
(Cause 2) The sensor is defective.
(Cause 3) The driver is malfunctioning or an error has occurred during communication
with the host CPU.
(Remedy 1) Wipe off dirt on the sensor and zero
Table X again.
(Remedy 2) It is required to replace the sensor with a new one. Contact our service
personnel for details.
(Remedy 3) Shut down the power of the machine once and power up the machine again.
After that, zero Table X. If this operation does not reset the machine to its
normal condition, the driver may be defective. Contact our service personnel
for details.
0102000 Table-X Origin
Detect lost pulse error.
(Cause 1)
(Remedy 1)
(Continued to the next page)
[1] The error IDs (IDs displayed in the "ERROR" window) are described in
the numerical order.
[2] Described are the classification (item) and the description in the
"ERROR" window.
[3] Described are the causes and remedial procedures of the errors in
"(Classification and Explanation)".
The causes and remedies are correlated as follows.
(Cause 1)
→ (Remedy 1)
(Cause 2) → (Remedy 2)
(Cause 3) → (Remedy 3)
[4] This indicates that the related contents are described subsequently on
the next page.
0609-002
2.2 Troubleshooting after Error Display
[1]
[2]
[3]
[4]
2-14 AKOEMT-ID
2.2.2 Error IDs and Controlled Areas
Basic System of Error IDs
An error ID is expressed by 7 digits (decimal number) as follows.
Major Classification of "Operating Axis", "Process Error",
and "Teaching Operation"
Error IDs and Controlled Areas
Table 4B5
Error ID Operation Axis
01
Table X Axis
02
Table Z Axis
03
Placement Z Correction Table θ Axis
04
Screen Y Axis
05
Squeegee Driving Axis
06
PEC Recognition Camera X Axis
07
PEC Recognition Camera Y Axis
08
Screen Recognition Camera X Axis
09
PCB Backup Axis
10
Table Chute Width
11
Input Conveyor
12
Output Conveyor
13
PCB Transfer
14
Squeegee Head
Error ID Process Error
15 Safety Device
16 Self-Diagnostics
17 Material Shortage
18 PEC Recognition
19 Screen Recognition
20 Cleaning
21
Operator’s Error
22 Others
0603-001
2.2 Troubleshooting after Error Display