4OM-1322-006_w.pdf - 第149页
2-12 AKOEMT -ID 2.2 T roubleshooting after Error Display Assuming "ID/ITEM/CONTENT" in the "ERROR" window as an index, the system retrieves the related page of the instruction manual. Refer to "2…
2-11 AKOEMT-ID
2.1.2 No Display on Touch Screen
Table 4B3
Symptom Nothing is displayed on the touch screen.
Cause (Cause 1) The screen saver function is activated.
(Cause 2) Power is not supplied from the source.
Remedy (Remedy 1) Touch a part of the touch screen.
The foreground activities will
occur in any running application.
(Remedy 2) Refer to “2.1.1 Power Operation Impossible” and follow the
remedial procedure.
0603-001
2.1 Easy Troubleshooting
2-12 AKOEMT-ID
2.2 Troubleshooting after Error Display
Assuming "ID/ITEM/CONTENT" in the "ERROR" window as an index, the
system retrieves the related page of the instruction manual.
Refer to "2.2.1 Typical Description" for the detailed description.
Fig. 4B9 Example of "ERROR" Window
0603-001
2.2 Troubleshooting after Error Display
2-13 AKOEMT-ID
2.2.1 Typical Description
Table 4B4
Error ID Error Name, Description, Cause, and Remedy
0101000 Table-X Origin
Zeroing opn. was incompleted, within specified time.
(Cause 1)
Dirt adheres to the sensor and the optical beam is shielded.
(Cause 2) The sensor is defective.
(Cause 3) The driver is malfunctioning or an error has occurred during communication
with the host CPU.
(Remedy 1) Wipe off dirt on the sensor and zero
Table X again.
(Remedy 2) It is required to replace the sensor with a new one. Contact our service
personnel for details.
(Remedy 3) Shut down the power of the machine once and power up the machine again.
After that, zero Table X. If this operation does not reset the machine to its
normal condition, the driver may be defective. Contact our service personnel
for details.
0102000 Table-X Origin
Detect lost pulse error.
(Cause 1)
(Remedy 1)
(Continued to the next page)
[1] The error IDs (IDs displayed in the "ERROR" window) are described in
the numerical order.
[2] Described are the classification (item) and the description in the
"ERROR" window.
[3] Described are the causes and remedial procedures of the errors in
"(Classification and Explanation)".
The causes and remedies are correlated as follows.
(Cause 1)
→ (Remedy 1)
(Cause 2) → (Remedy 2)
(Cause 3) → (Remedy 3)
[4] This indicates that the related contents are described subsequently on
the next page.
0609-002
2.2 Troubleshooting after Error Display
[1]
[2]
[3]
[4]