4OM-1322-006_w.pdf - 第12页
9 AKOE-ID (3) About disposal of lubricants such as grease Lubricants shall be entrusted to an authorized industrial waste disposal firm and disposed of in accordance with "Provisions related to W aste Disposal and Cl…
8
AKOE-ID
About Specification Change
Consult the marketing department or sales agency of Hitachi High-Technologies
for desired changes of the machine specifications.
In no event will we be liable for any direct, indirect, special, incidental, or
consequential damages resulting from any modification made without any prior
notice in a written form.
About Disposal of Machine
This machine uses solder paste and industrial alcohol.
Be sure to wear protective equipment (gloves, apron, and mask, etc.) during the
disposal work.
Before disposing of the machine, obtain the material safety data sheet (MSDS)
from each product maker and check them carefully. Each material should be
disposed of according to the described disposal method.
The machine must be handled differently than ordinary trash.
(1) About Disposal of Solder Paste
Solder paste should be entrusted to an authorized industrial waste
disposal firm and disposed of in accordance with "Ordinance on
Prevention of Lead Poisoning and Provisions related to
Waste Disposal
and Cleaning".
Rags, cleaning paper
, etc., used for wiping shall also be disposed of in
the same way.
Obtain the material safety data sheet (MSDS) from the maker and check
the contents described in detail.
(2) About Disposal of Industrial Alcohol
Industrial alcohol should be entrusted to an authorized industrial waste
disposal fi
rm and disposed of in accordance with "Provisions related to
Waste Disposal and Cleaning".
Rags, etc., must be damped with industrial alcohol and incinerated in an
open incinerator
.
As for disposal of the container, be sure to remove alcohol completely
from the container before the disposal.
Obtain the material safety data sheet (MSDS) from the maker and check
the contents described in detail.
0603-001
9
AKOE-ID
(3) About disposal of lubricants such as grease
Lubricants shall be entrusted to an authorized industrial waste disposal
firm and disposed of in accordance with "Provisions related to Waste
Disposal and Cleaning".
Rags, etc., used for wiping shall also be disposed of in the same way.
O
btain the material safety data sheet (MSDS) from the maker and check
the contents described in detail.
(4) About Disposal of Machine
Contact the marketing department or sales agency of Hitachi High-
T
echnologies for the detailed information on the disposal method of the
machine.
Other Precautionary Items
Trade Marks and Registered Trade Marks
Windows is a registered trademark of the Microsoft Corporation in the United
States and other countries.
All other corporate and product names in this manual are owned by and are the
trademarks or registered trademarks of their respective companies.
Neither (TM) nor (R) marks are described clearly in this manual.
0603-001
10
AKOE-ID
0603-001