4OM-1322-006_w.pdf - 第67页

1-8 AKOEMT -ID 0609-002 2.2 Weekly Maintenance T able 4A7 Object Units Inspection, Cleaning, and Lubrication Spots Work Grease Required T ools Check 3.3.1 Air Source Drain Cleaning - Container, etc. 3.3.4 PEC Recognition…

100%1 / 211
1-7 AKOEMT-ID
WARNING
As industrial alcohol is flammable, be sure to keep it away from
any possible sources of fire as it is likely to ignite and start a fire.
•
Keep industrial alcohol away from any heat of fire.
•
Avoid smoking and using fire when near the device.
CAUTION
Industrial alcohol is a highly toxic substance.
•
When you use industrial alcohol (solvent), be sure to wear protective
eq
uipment (gloves and apron, etc.) to protect against spills on exposed
skin.
•
Whenever solder paste has adhered to your skin, immediately remove
it with lukewarm water mixed with a cleaning detergent.
0704-003
2.1 Daily Maintenance
1-8 AKOEMT-ID
0609-002
2.2 Weekly Maintenance
Table 4A7
Object Units
Inspection, Cleaning,
and Lubrication Spots
Work
Grease Required Tools
Check
3.3.1
Air Source
Drain Cleaning - Container, etc.
3.3.4
PEC Recognition
Section
PCB Warpage
Top Holder
(Outer Circumference
of Roller)
Cleaning - Rag
PCB Stopper Cleaning - Rag
3.3.6
PCB Chuck Section
Upper Surface and Pin
Hole Section of Backup
Table
Cleaning -
Vacuum Cleaner
3.3.10
Blower Unit
Vacuum Filter Cleaning -
Air Gun and
Vacuum Cleaner
2.2 Weekly Maintenance
1-9 AKOEMT-ID
2.3 Monthly Maintenance
Table 4A8
Object Units
Inspection, Cleaning,
and Lubrication Spots
Work
Grease Required Tools
Check
3.3.2
Squeegee Head
Section
Camera (Lens) Cleaning - Air Blow Brush for
Camera
Recognition Lighting
Glass Surface
Cleaning - Air Blow Brush for
Camera
Squeegeee Head
Y-Axis Linear Guide
(Left Side), (Right Side)
Cleaning -
Oiled Rag
Screen Recognition
X-Axis Linear Guide
Cleaning - Oiled Rag
Guide Bushing for
Squeegee Up/Down
Movement
Cleaning - Oiled Rag
3.3.3
Screen Holder Section
Screen Y-Axis
Linear Guide
Cleaning
- Oiled Rag
3.3.4
PEC Recognition
Section
Camera (Lens) Cleaning - Air Blow Brush for
Camera
Recognition Lighting
Glass Surface
Cleaning - Air Blow Brush for
Camera
X-Axis Linear Guide Cleaning - Oiled Rag
Y-Axis Linear Guide Cleaning
- Oiled Rag
3.3.5
Conveyor Section
Spline Axis for L
Conveyor
Width Change
Cleaning - Oiled Rag
Trapezoid Screw for L
Conveyor Width Change
Cleaning - Oiled Rag
Guide Bushing for L
Conveyor W
idth Change
Cleaning - Oiled Rag
Spline Axis for R
Conveyor W
idth Change
Cleaning - Oiled Rag
Trapezoid Screw for R
Conveyor W
idth Change
Cleaning - Oiled Rag
Guide Bushing for R
Conveyor Width Change
Cleaning
- Oiled Rag
3.3.6
PCB Chuck Section
Backup Table Z-Axis
Guide Bushing
Cleaning
- Oiled Rag
Linear Guide for Chute
Width Adjustment
(Left Side), (Right Side)
Cleaning
- Oiled Rag
Linear Guide for
PCB Clamping
Cleaning - Oiled Rag
0609-002
2.3 Monthly Maintenance