4OM-1322-006_w.pdf - 第27页
Safety Precautions Safe-14 AKOE-ID Alert Indications described as " " (continuted) Alert Description Related Items Industrial alcohol leaks are likely to cause fires. • Whenever an industrial alcohol leakage is …
Safe-13
AKOE-ID
Safety Precautions
Alert Indications described as " " (continuted)
Alert Description Related Items
Industrial alcohol is a highly toxic substance.
•
When you use industrial alcohol (solvent), be sure to wear protective
equipment (gloves and apron, etc.) to protect against spills on
exposed skin.
•
Whenever solder paste has adhered to your skin, immediately remove
it with lukewarm water mixed with a cleaning detergent.
"2.1" in
"
Ch
apter 1 (Vol. 4)"
Set the [OPERATION/SET UP] switch to the "SET UP" side
before work.
Only the person in charge of maintenance should perform this
work.
"4.3" and "4.6" in
"Chapter 1
(Vol. 4)"
Be sure to turn off the power supply to the machine before work.
Only the person in char
ge of maintenance work should perform this
operation.
"4.4" in
"
Ch
apter 1 (Vol. 4)"
Industrial alcohol is likely to ignite if spilt within the machine.
•
Do not put the industrial alcohol on the machine. Otherwise, you may
spill the alcohol by mistake, causing it to flow into the inside of the
machine.
•
Do not put the industrial alcohol nor the replenishment container
inside the machine.
•
Be sure not to perform replenishment work (supplying the
replenishment container with industrial alcohol) in the machine.
•
Do not spill industrial alcohol outside the solvent tank during the
replenishment work.
•
If you have spilt solvent by mistake, clean it up with a rag as soon as
possible.
•
After cleaning up the spilt solvent, confirm that it has dried
completely and enough ventilation is provided. After that, turn on the
power switch of the machine.
•
The pressure of the air supplied to the solvent tank is set to 0.015
MPa (0.15 kgf/cm
2
).
If more than the specified pressure is applied, the tank may explode.
Be sure not to change the set pressure.
"4.4" in
"Ch
apter 1 (Vol. 4)"
0704-003
CAUTION
Safety Precautions
Safe-14
AKOE-ID
Alert Indications described as " " (continuted)
Alert Description Related Items
Industrial alcohol leaks are likely to cause fires.
•
Whenever an industrial alcohol leakage is found, turn off the power
switch of the machine immediately
.
•
When it is impossible to determine the cause of a leak or to repair
a leak, contact the marketing department or sales agency of Hitachi
High-Technologies.
•
It may be difficult to detect a leakage because industrial alcohol is a
volatile liquid.
Be sure to carefully confirm that there are no traces of leaks around
joints, etc.
"4.5" in "Chapter 1
(Vol. 4)"
0704-003
CAUTION
Safe-15
AKOE-ID
Safety Precautions
4. Alert Labels (Warning and Caution Labels, etc.)
Alert labels are affixed near the places where special attention is required.
Before operating the machine, be sure to read the cautionary instructions on alert labels.
Notes on Handling the Alert Labels
•
When an alert label is dirty, remove the dirt with water or neutral detergent.
Use neither gasoline nor organic solvent.
•
When dirt and dust on an alert label cannot be removed or an alert label is damaged
or peeled of
f, contact the marketing department or sales agency of Hitachi High-
T
echnologies.
•
Before replacing an alert label with a new one, be sure to confirm that both old and new
labels are identical to each other
.
0704-002