4OM-1322-006_w.pdf - 第18页
Safe-5 AKOE-ID Safety Precautions 0609-002 Do not change the set pressure of the regulator that is used to pressurize the solvent tank. (Regulator Set Pressure: 0.015 MPa) If more than the specifi ed pressure is applied…
Safety Precautions
Safe-4
AKOE-ID
Precautions before Use
Confirm that no covers are disengaged before operating the machine.
If the machine is used with its cover(s) being detached, a serious accident may
occur.
Be sure to attach them in place.
Before turning on the power supply to the machine, make certain that no
per
son or object comes in contact with the moving mechanisms of the machine
so as to avoid any accidental injuries.
Do not start the machine unless those working in the immediate area of the
machine are aware of hazards from moving parts.
Do not set the [OPERATION/SET UP] switch to the "SET
UP" side for any
operations other than setup purposes.
When the switch is set to the "SET UP" side, setup operations become
possible with the door being open. It is very dangerous to operate the machine
without safety check. Be sure to pay special caution while operating the
machine.
The key shall be kept removed (excluding the time of setup operations) and
stored by the person in charge.
With the exception of industrial use alcohol, do not use cleaning solvents.
In particular, be sure not to use gasoline by mistake as it is highly flammable.
As industrial alcohol is flammable, be sure to keep it away from any possible
sources of fire as it is likely to ignite and start a fire.
Keep away from fire.
A
void smoking and using fire when near the device.
Industrial alcohol can cause poisoning, skin inflammation, or degreasing.
T
ry to wear goggles, protective gloves, a protective mask, etc., to protect
against spills on exposed skin.
Before starting the machine and after a setup operation, be sure to check if
any industrial alcohol is leaking from a crack of the hose joint or the hose itself
running between the solvent tank and the cleaning nozzle.
Do not operate the machine while industrial alcohol is leaking. Otherwise, the
leaking alcohol may catch fire easily.
Refer to "2.1 Daily Maintenance" and "4.5 Checking of Industrial Alcohol Hose
and Joints" in "Chapter 1 (Vol. 4)" for the areas to be checked.
Whenever a leakage is found, contact our service person.
0704-002
Safe-5
AKOE-ID
Safety Precautions
0609-002
Do not change the set pressure of the regulator that is used to pressurize the
solvent tank.
(Regulator Set Pressure: 0.015 MPa)
If more than the specifi
ed pressure is applied, the tank may explode.
Be sure to wear suitable clothes for working so as to avoid any injuries.
Try to bundle your hair in ponytail or a braid. Otherwise, your hair might get
caught in the moving mechanisms of the machine.
Be sure to fasten the buttons on your clothes (especially sleeves) to avoid
getting caught in the moving mechanisms of the machine.
Even after the [EMERGENCY STOP] switch is pressed, note that electrical
power is supplied to the control device.
T
o shutdown the power to all loads, set the power breaker to "OFF".
When an "Emer
gency Switch Off" function is required, it must be prepared outside the
machine on the customer side.
Emergency Switch Stop :
Emergency Interception of Controlled Load Power
Sources
Emergency Switch Off
: Emergency Interception of All Load Power Sources
In principle, the overall operation of the machine including the button
operations on the operation panel and the touch screen must be controlled by
only one person.
If there are more than one, ensure good communication by giving loud verbal
instructions.
Attach the internal lid of the solvent tank and tighten the cap securely.
If the cap gets loose, adequate pressure may not be applied or the solvent
may leak out.
Before starting the automatic operation, check carefully that there is no person around
the machine (especially on the other side of the machine operation). Make sure that no
objects (tools, parts, etc.) are left behind.
Data may become unavailable due to breakdown or mishandling of the machine.
It is strongly recommended that the compact fl
ash (CF) memory data be periodically
backed up with the network terminal (option).
Safety Precautions
Safe-6
AKOE-ID
Notes on Machine Operations
This machine uses energetic driving systems and high voltage. This power and
voltage is high enough to cause death or serious injury. To avoid this danger,
respect the following guideline.
•
The machine must be used with the covers being attached.
•
Be sure to close the door before operating the machine.
•
Do not disengage the interlock mechanism of the door.
Whenever you feel danger or abnormality, immediately press the
[EMERGENCY ST
OP] switch to stop the machine.
If the machine is kept running in abnormal condition, an accident or a
breakdown will result.
When there is a problem with the machine, locate the cause and assess the
condition. Set the power breaker to "OFF".
After the problem has been rectified completely, reset the machine to its
normal condition.
Never remove the cap of the solvent tank while the machine is running.
Otherwise, the internal cap may pop out, dispersing industrial alcohol and
causing a personal injury (loss of eyesight, etc.).
When some industrial alcohol spills out of the solvent tank or the pan,
immediately stop the operation, turn off the power supply
, and wipe the spills
with a rag, etc.
Do not bring such a tank close to any heat of fi
re to evaporate the spilt alcohol
because it can catch fire very easily.
When the green lamp of the light tower is ON or flickering (ON and OFF), it indicates
that the static machine is in the "Automatic" mode (standby mode). Do not touch any
moving areas of the machine.
In case of a disaster of any kind, earthquake, storm, fl
ood, fire, or lightning,
immediately stop the machine and turn of
f the power supply
.
0704-002