4OM-1322-006_w.pdf - 第19页
Safety Precautions Safe-6 AKOE-ID Notes on Machine Operations This machine uses e nergetic driving syst ems and high volta ge. This power and voltage is high enough to cause death or serious injury . T o avoid this dan…
Safe-5
AKOE-ID
Safety Precautions
0609-002
Do not change the set pressure of the regulator that is used to pressurize the
solvent tank.
(Regulator Set Pressure: 0.015 MPa)
If more than the specifi
ed pressure is applied, the tank may explode.
Be sure to wear suitable clothes for working so as to avoid any injuries.
Try to bundle your hair in ponytail or a braid. Otherwise, your hair might get
caught in the moving mechanisms of the machine.
Be sure to fasten the buttons on your clothes (especially sleeves) to avoid
getting caught in the moving mechanisms of the machine.
Even after the [EMERGENCY STOP] switch is pressed, note that electrical
power is supplied to the control device.
T
o shutdown the power to all loads, set the power breaker to "OFF".
When an "Emer
gency Switch Off" function is required, it must be prepared outside the
machine on the customer side.
Emergency Switch Stop :
Emergency Interception of Controlled Load Power
Sources
Emergency Switch Off
: Emergency Interception of All Load Power Sources
In principle, the overall operation of the machine including the button
operations on the operation panel and the touch screen must be controlled by
only one person.
If there are more than one, ensure good communication by giving loud verbal
instructions.
Attach the internal lid of the solvent tank and tighten the cap securely.
If the cap gets loose, adequate pressure may not be applied or the solvent
may leak out.
Before starting the automatic operation, check carefully that there is no person around
the machine (especially on the other side of the machine operation). Make sure that no
objects (tools, parts, etc.) are left behind.
Data may become unavailable due to breakdown or mishandling of the machine.
It is strongly recommended that the compact fl
ash (CF) memory data be periodically
backed up with the network terminal (option).
Safety Precautions
Safe-6
AKOE-ID
Notes on Machine Operations
This machine uses energetic driving systems and high voltage. This power and
voltage is high enough to cause death or serious injury. To avoid this danger,
respect the following guideline.
•
The machine must be used with the covers being attached.
•
Be sure to close the door before operating the machine.
•
Do not disengage the interlock mechanism of the door.
Whenever you feel danger or abnormality, immediately press the
[EMERGENCY ST
OP] switch to stop the machine.
If the machine is kept running in abnormal condition, an accident or a
breakdown will result.
When there is a problem with the machine, locate the cause and assess the
condition. Set the power breaker to "OFF".
After the problem has been rectified completely, reset the machine to its
normal condition.
Never remove the cap of the solvent tank while the machine is running.
Otherwise, the internal cap may pop out, dispersing industrial alcohol and
causing a personal injury (loss of eyesight, etc.).
When some industrial alcohol spills out of the solvent tank or the pan,
immediately stop the operation, turn off the power supply
, and wipe the spills
with a rag, etc.
Do not bring such a tank close to any heat of fi
re to evaporate the spilt alcohol
because it can catch fire very easily.
When the green lamp of the light tower is ON or flickering (ON and OFF), it indicates
that the static machine is in the "Automatic" mode (standby mode). Do not touch any
moving areas of the machine.
In case of a disaster of any kind, earthquake, storm, fl
ood, fire, or lightning,
immediately stop the machine and turn of
f the power supply
.
0704-002
Safe-7
AKOE-ID
Safety Precautions
Notes on Installation, Transfer and Maintenance
Do not install or transfer the machine on the customer side after shipment.
T
o ensure perfect operation of the machine, including safety and accuracy, only our
installation service department will install the machine or transfer it to another place.
Only the maintenance work on items described in this manual should be performed by
the customer. Please read the instruction manual carefully before maintenance work.
Do not perform any maintenance work on items that are not described in this manual.
Otherwise, not only breakdown of the machine but also personal injury may result.
When an alert label has deteriorated and become illegible, contact our service
department.
0603-001