00192405-02.pdf - 第149页
User Manual SIPLAC E S-25 HM 4 Component han dling Software Version SR.502.xx 01/2001 US Edition 4.7 Matrix tray changer 149 W A RNING 4 Å NEVER pl ace your h and in the gaps betwee n the M TC and machi ne frame (item 1)…
4 Component handling User Manual SIPLACE S-25 HM
4.7 Matrix tray changer Software Version SR.502.xx 01/2001 US Edition
148
4.7.6 Safety instructions for coupling and uncoupling the matrix tray changer
4
Fig. 4.7 - 3 Safety instructions for coupling and uncoupling the MTC
(1) Gap when the MTC is coupled
(2) MTC control cable
(3) Control cable for component feeder table
(4) Power supply connection
User Manual SIPLACE S-25 HM 4 Component handling
Software Version SR.502.xx 01/2001 US Edition 4.7 Matrix tray changer
149
WARNING 4
Å NEVER place your hand in the gaps between the MTC and machine frame (item 1) while
the machine is running.
Å Always couple the MTC to the machine before connecting or disconnecting the MTC control
cable at the machine socket (item 2).
Å Always couple the MTC to the machine before connecting or disconnecting the control
cable for the MTC’s integral component feeder table at the machine socket (item 3).
Å Always couple the MTC to the machine before connecting or disconnecting the power cable
from the external power supply (item 4).
Å NEVER operate the MTC if it is not coupled to the machine.
4 Component handling User Manual SIPLACE S-25 HM
4.7 Matrix tray changer Software Version SR.502.xx 01/2001 US Edition
150