Pneumatic Tape Feeder _ENG Ver9_.pdf - 第21页
Overview 1-13 Figure 1-14. Embossed Carrier T ape (32mm-56mm ) Dimensions for EIA-481-1A, EIA-481-2-A standard 12mm 16mm 24mm 32mm 44mm 56mm T2 Max. 6.5 8.0 12.0 12.0 *16.0 *20.0 B1 Max. 8.2 12.1 20.1 23.0 35.0 46.0 (For…
Samsung Pneumatic Tape Feeder Users' Manual
1-12
1.2.3. Applicable components
Square chips, MELF, TR, SOP, PLCC, odd-type components
(For the 8mm Embossing Type Tape Feeder, the maximum length of T
2
is 2.5 mm.
for NST08E-4P, it is 3.5 mm. And for NST08E-4P, the maximum length of B1 is 4.35
mm. for NST08E-4P, it is 4.0 mm.)
Figure 1-12. Embossed Carrier Tape (8/12mm)
Figure 1-13. Embossed Carrier Tape (16/24mm)
Overview
1-13
Figure 1-14. Embossed Carrier Tape (32mm-56mm)
Dimensions for EIA-481-1A, EIA-481-2-A standard
12mm 16mm 24mm 32mm 44mm 56mm
T2 Max. 6.5 8.0 12.0 12.0
*16.0
*20.0
B1 Max. 8.2 12.1 20.1 23.0 35.0 46.0
(For NST12~56E-(L/S) Tape Feeder, the maximum length of T2.is 12.5mm.)
1.2.4. Table for pitch setting
Table 1-2. Table for pitch setting (unit: mm)
Samsung Pneumatic Tape Feeder Users' Manual
1-14
Caution
If TF-NST08, TF-P08, TF-S08 4mm pitch is used for
1005(2mm pitch), pick up error or component dumping
could occur often.
Be sure to use the feeder(2mm pitch) exclusively for
feeding 1005 chip and 0603 chip
Since TF-NST08E-4P and TF-NST08E-2P are used
exclusively for the Emboss Tape Feeder, pickup error
and other problems may occur if paper tape is used. In
such case, numerous components will be dumped.
Therefore, use only Emboss Tape.