Pneumatic Tape Feeder _ENG Ver9_.pdf - 第22页

Samsung Pneumatic T ape Feeder Users' Manual 1-14 Caution If TF-NST08, TF-P08, TF-S08 4mm pitch is used for 1005(2mm pitch), pick up error or component dumping could occur often. Be sure to use the feeder(2mm pitch)…

Overview

1-13

Figure 1-14. Embossed Carrier Tape (32mm-56mm)

Dimensions for EIA-481-1A, EIA-481-2-A standard

12mm 16mm 24mm 32mm 44mm 56mm

T2 Max. 6.5 8.0 12.0 12.0

*16.0

*20.0

B1 Max. 8.2 12.1 20.1 23.0 35.0 46.0

(For NST12~56E-(L/S) Tape Feeder, the maximum length of T2.is 12.5mm.)

1.2.4. Table for pitch setting

Table 1-2. Table for pitch setting (unit: mm)

Samsung Pneumatic Tape Feeder Users' Manual

1-14

Caution

If TF-NST08, TF-P08, TF-S08 4mm pitch is used for

1005(2mm pitch), pick up error or component dumping

could occur often.

Be sure to use the feeder(2mm pitch) exclusively for

feeding 1005 chip and 0603 chip

Since TF-NST08E-4P and TF-NST08E-2P are used

exclusively for the Emboss Tape Feeder, pickup error

and other problems may occur if paper tape is used. In

such case, numerous components will be dumped.

Therefore, use only Emboss Tape.

Overview

1-15