Pneumatic Tape Feeder _ENG Ver9_.pdf - 第44页
Samsung Pneumatic T ape Feeder Users' Manual 2-20 Figur e 2-36. How to set the uppe r cover tape o n the r oller and betw een gears (12/ 16mm No n-S top T ape Feeder)
Operation of the Tape Feeder
2-19
Roller D and place it between the idler gear and the forming gear. Pull the upper cover
tape so that it is tight between the two gears and fix it.
Figure 2-34. How to fix the upper cover tape (8mm non-stop tape feeder)
Figure 2-35. How to fix the upper cover tape (12/16mm non-stop tape feeder)
Caution
When the upper cover tape passes over the roller E or it
passes between the idler gear and the forming gear, ensure
that it shall pass through flatly without being folded or being
able to skip the roller or the idler.
If it is folded or comes out of the idler gear, the vinyl sheet
may be rolled up. Take care to avoid such occurrence.
Roller E
Forming gear
Idler gear
Samsung Pneumatic Tape Feeder Users' Manual
2-20
Figure 2-36. How to set the upper cover tape on the roller and between gears (12/16mm Non-Stop
Tape Feeder)
Operation of the Tape Feeder
2-21
Figure 2-37. Installing the upper cover tape of the 8mm non-stop tape feeder (disposal type)
Roller A
Roller B
Groove B
Roller D
Roller E
Forming gear
Idler gea
r